| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Hi all,
Please refer to the image below:
The circular path is the local path while the path passing through the global costmap is the global path. Any ideas why the global path is passing through the global costmap? I am using move_base with navfn and trajectory rollout.
Thanks
If the obstacle was not present when the global planner calculated the global path, then it would explain what you are seeing. The global planner will not look for a new global path until the local planner tells it (via the move_base node) that it has "given up" because it could not follow it. The circular path that you are seeing for the local planner suggests that it is doing some strange oscillation, so you may want to adjust your settings to make sure it can give up and let the global planner re-plan.
Ok but you are sure that the global costmap was marked like this when you gave the goal to move_base ? Your laser scans don't seem to match very well with the map, if you localization is not very stable it would explain that the marking of the obstacle on the costmap gets shifted.
Asked: 2016-03-21 16:20:54 -0500
Seen: 849 times
Last updated: Mar 21 '16
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
