ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange
Ask Your Question

RGB-D SLAM (Non-ROS) Error: octomap_server/OctomapServerConfig.h: No such file or directory

asked 2013-02-10 20:56:27 -0600

magnate gravatar image

updated 2014-01-28 17:15:11 -0600

ngrennan gravatar image

System description: Ubuntu 11.10, 64-bit, with ROS Fuerte installed

I followed the directions for the "non-ROS" installation of RGBDSLAM, as indicated here:

The process is smooth until the very end, where I attempt to make the package, using:

rosmake rgbdslam_freiburg

The error occurs during compilation; the terminal output is as follows:

[ 34%] Building CXX object CMakeFiles/rgbdslam.dir/src/main.o In file included from /home/magnate/ros/rgbdslam_freiburg/rgbdslam/src/ColorOctomapServer.h:4:0, from /home/magnate/ros/rgbdslam_freiburg/rgbdslam/src/graph_manager.h:31, from /home/magnate/ros/rgbdslam_freiburg/rgbdslam/src/openni_listener.h:30, from /home/magnate/ros/rgbdslam_freiburg/rgbdslam/src/main.cpp:17: /opt/ros/fuerte/stacks/octomap_mapping/octomap_server/include/octomap_server/OctomapServer.h:50:48: fatal error: octomap_server/OctomapServerConfig.h: No such file or directory compilation terminated. make[3]: * [CMakeFiles/rgbdslam.dir/src/main.o] Error 1 make[3]: Leaving directory /home/magnate/ros/rgbdslam_freiburg/rgbdslam/build' make[2]: *** [CMakeFiles/rgbdslam.dir/all] Error 2 make[2]: Leaving directory/home/magnate/ros/rgbdslam_freiburg/rgbdslam/build' make[1]: * [all] Error 2 make[1]: Leaving directory `/home/magnate/ros/rgbdslam_freiburg/rgbdslam/build' -------------------------------------------------------------------------------} [ rosmake ] Output from build of package rgbdslam written to: [ rosmake ] /home/magnate/.ros/rosmake/rosmake_output-20130211-032124/rgbdslam/build_output.log
[rosmake-0] Finished <<< rgbdslam [FAIL] [ 13.96 seconds ]
[ rosmake ] Halting due to failure in package rgbdslam. [ rosmake ] Waiting for other threads to complete.
[ rosmake ] Results:
[ rosmake ] Built 47 packages with 1 failures.
[ rosmake ] Summary output to directory

If anyone has insight about what the issue might be, and how it could be resolved, it would be much appreciated.

edit retag flag offensive close merge delete


@Felix-Endres (below): Thanks mate, that was it.

magnate gravatar image magnate  ( 2013-02-11 07:02:24 -0600 )edit

1 Answer

Sort by ยป oldest newest most voted

answered 2013-02-11 02:04:14 -0600

You need to apply the patch in the rgbdslam folder:

roscd rgbdslam
sudo patch /opt/ros/fuerte/stacks/octomap_mapping/octomap_server/manifest.xml <octomap_server_manifest.patch

Not your fault, the fact is missing from the walkthrough you followed, I'll add it.

edit flag offensive delete link more


is there any such patch available for groovy? i'm facing the same problem with groovy

Maheshwar Venkat gravatar image Maheshwar Venkat  ( 2013-05-08 23:20:08 -0600 )edit

If I remember correctly, the patch is actually not required anymore because the octomap_server has been updated. Otherwise, just look into the patch file, it's only one line that adds some definitions. Should work for the respective file in groovy too.

Felix Endres gravatar image Felix Endres  ( 2013-05-13 11:21:53 -0600 )edit

Question Tools


Asked: 2013-02-10 20:56:27 -0600

Seen: 445 times

Last updated: Feb 11 '13