| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
The recommended(8x6) calibration board is so big they won't print on a normal printer. How do you make yours? I'm using a white illustration board then pasting cut-outs of black art papers. In the long run they tend to be curved and my cuts are not that precise which is not ideal in calibration. I'm looking for a better way to have a longer lasting calibration board.
A quick solution: Buy a large poster board sheet (something like this). Then print your checkerboard on A4 (or letter) sized paper. It will get cut across several (usually 4) sheets. The squares along the edges will get cut in the middle, and you can use that to align the 4 pieces properly. Glue the sheets to the cardboard, making sure the edges are aligned.
A better solution: use an aluminum dibond plate and get it custom printed. The details are discussed in this thread.
I have had good results with using aluminum dibond with a calibration pattern glued on. I go to 858 Graphics (that link has pricing information, which is very reasonable for small boards) and just send them a PDF file with the calibration pattern. There are likely similar shops wherever you happen to live.
This is a Python script I use to generate the PDF files I send to them. That script requires you to fiddle with the text placement a bit, but I've found it convenient to have the pattern details printed on the board so you don't forget the sizes a year from now.
We took a cardboard sheets attached together, cut pieces of black and white blocks as per size 108 mm. and to make it straight and stable we attached ply wood around the cardboard from back side. I am sure there are good ways to do this but this process worked for us.
Asked: 2011-03-03 15:20:40 -0600
Seen: 4,748 times
Last updated: Dec 06 '12
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
