Ask Your Question

navigation stack SendingSimpleGoals Tutorial

asked 2011-03-18 03:09:50 -0500

avin111 gravatar image

updated 2011-03-26 07:45:35 -0500

tfoote gravatar image

Hi all, I am trying to run on our differential drive robot with the navigation stack.I am using cturtle 1.2.4.the tf transform in my setup is map->odom->base_link->base_laser.However When i am giving the initial pose using rviz to make the robot to be on map the odom frame is not moving with respect to the base_link.It is staying at the same place as before.However the laser frame is transforming properly.I am not able to give the goal to the robot.When i used sending goals through code the following error is showing "The base failed to move forward 1 meter for some reason".As far as i understand the localization is working fine.So where I am going wrong?Thanking you

edit retag flag offensive close merge delete


Is this a custom robot or are you using an existing driver to provide access to the robot itself (such as p2os or rosaria)?
Eric Perko gravatar image Eric Perko  ( 2011-03-18 03:16:08 -0500 )edit
no we have build the robot ourselves and also written the drivers.The drivers are working fine because we are able to operate it using joystick.
avin111 gravatar image avin111  ( 2011-03-18 04:05:19 -0500 )edit
So you are using the code from to send goals?
Eric Perko gravatar image Eric Perko  ( 2011-03-18 05:07:55 -0500 )edit
yes I am using the same code to send goals..
avin111 gravatar image avin111  ( 2011-03-18 05:46:10 -0500 )edit

2 Answers

Sort by ยป oldest newest most voted

answered 2011-03-26 07:46:53 -0500

tfoote gravatar image

With your updates to the question the error you are getting says that the move base action failed. Do you have 1 meter of free space in front of the robot? Try it with a smaller distance defined.

edit flag offensive delete link more


i will try that and reply u back.Thank you for the suggestion..
avin111 gravatar image avin111  ( 2011-03-27 20:29:54 -0500 )edit

answered 2011-03-18 03:15:33 -0500

Eric Perko gravatar image

updated 2011-03-18 05:56:12 -0500

It sounds like perhaps your base_link->odom transform is not updating. Does the robot move in rviz if you joystick or push it around?

The Robot Setup tutorial has details on setting up an example odometry source.

A good sanity check for whether or not your odometry is working correctly is to joystick the robot around with the following rviz configuration:

 set the fixed_frame to odom
 set the decay_time on the laser scanner's topic to something very large (1000 or so should do)

If your odometry is working properly (and is accurate), you should get something that looks like a map of your environment. If you don't get anything like that, there is definitely a problem with your base_link->odom transform.

edit flag offensive delete link more


i have tried moving using joystick .the odom frame is moving along with the base_link frame when i am using joystick.but when i am trying to give a goal in rviz it is not working.
avin111 gravatar image avin111  ( 2011-03-18 03:38:43 -0500 )edit
@avin111: Since debugging the navigation stack will likely involve lots of back and forth, can you make sure to update the question to include all the extra info from this and the comment above (and any other future comments that add more info to the question)? This will keep things better organized
Eric Perko gravatar image Eric Perko  ( 2011-03-18 05:10:00 -0500 )edit
Since the Joystick works, can you check the output on /cmd_vel (or whatever you may have remapped the cmd_vel topic to) when the navigation stack is trying to execute a goal? Also, do you get any output in, say, rxconsole, from move_base when it "fails to move forward 1 meter"?
Eric Perko gravatar image Eric Perko  ( 2011-03-18 05:13:00 -0500 )edit
You say that the odom frame "moves with" the base link which is not what it's supposed to do. The odom frame is supposed to stay approximately stationary while the robot moves around. How are you computing your odom?
tfoote gravatar image tfoote  ( 2011-03-18 05:43:51 -0500 )edit
@tfoote i am computing my odom using encoders.As said before the odom frame is grouping into red lines when it is moving forward.even the robot moves along with this.
avin111 gravatar image avin111  ( 2011-03-18 05:48:15 -0500 )edit
@avin111: @tfoote has a good point (that I missed when reading your comment). See REP 105 for details on the coordinate frames used: . See update to answer for more debugging steps.
Eric Perko gravatar image Eric Perko  ( 2011-03-18 05:53:38 -0500 )edit
@eric i am getting a map which is looking somewhat like my environment...So my odom->base_link transform is correct?
avin111 gravatar image avin111  ( 2011-03-18 06:36:07 -0500 )edit

Your Answer

Please start posting anonymously - your entry will be published after you log in or create a new account.

Add Answer

Question Tools

1 follower


Asked: 2011-03-18 03:09:50 -0500

Seen: 1,148 times

Last updated: Mar 26 '11