Queries about sensors in simulation

asked 2012-10-17 00:36:02 -0600

ChengXiang
201 ●26 ●32 ●40

updated 2014-01-28 17:13:57 -0600

ngrennan
1 ●1 ●1

Hi. I am a new user to ROS and have some questions regarding the use of sensors in simulation.

I undrstand that in order to simulate a sensors, you need to write the gazebo extension for it in the robot's URDF file My doubts are mainly about the elements in the gazebo's extension block.

First of all, am I right to said that the controllers are what that operate the sensors in gazebo? So do I need to install drivers for sensors at all?

To use the controller, you need to choose the correct plugins, but where do we download the plugins from? The sensor's wiki page?

Lastly, how do we know what to include in the elements within the <controller> element? So far what I did is just refer the code block from robots like turtlebot without understanding what each part is for.

I checked this website, but it is still work in process.

Thank you.Pardon me if my questions sounds amatuerish.

Comments

What type(s) of sensors are you interested in learning more about?

SL Remy ( 2012-10-17 07:29:10 -0600 )edit

Hi. Right now I am trying to learn more about camera sensor. But as my project progress, I might also need to incorporate IMU and GPS.

ChengXiang ( 2012-10-17 16:34:36 -0600 )edit

add a comment

answered 2012-10-18 02:53:10 -0600

SL Remy
2022 ●26 ●49 ●67

updated 2012-10-18 10:50:38 -0600

The site is still being developed but keep your eye on the sensors page.

All the sensors that you've mentioned (camera, gps, imu) do already exist.

Some are provided by gazebo, and others are provided as plugins by the ROS community.

(gazebo "native" examples include include CameraSensor, ContactSensor, DepthCameraSensor, ImuSensor, RaySensor, RFIDSensor, RFIDTag) and check out Team Hector's ROS gazebo plugins.

An example of how they use their camera can be seen in quadrotor_with_cam.urdf.xacro.

edit flag offensive delete link

Comments

Thanks trinighost. The team Hector's site answers my doubt on the XML's parameter. So I will not need to install sensors' drivers for simulation? Just the plugin will do?

ChengXiang ( 2012-10-18 04:35:04 -0600 )edit

I think it's safe to consider a gazebo plugin as the equivalent of a sensor driver..

SL Remy ( 2012-10-18 04:53:23 -0600 )edit

And you will need to "install" (i.e. download/checkout/rosinstall then rosmake) the packages that have the plugins that you need.

SL Remy ( 2012-10-18 04:55:03 -0600 )edit

I see. That is what I think too. Just that I wasn't too sure about that. Thanks for clarifying.

ChengXiang ( 2012-10-18 05:16:22 -0600 )edit

Note that the hector_gazebo stack is released since a couple of weeks at least for ROS fuerte, so you can simply run "sudo apt-get install ros-fuerte-hector-gazebo" to make the sensor plugins available.

Johannes Meyer ( 2012-10-19 23:39:55 -0600 )edit

I see. Thank you.

ChengXiang ( 2012-10-20 22:59:43 -0600 )edit

add a comment

Queries about sensors in simulation

Comments

1 Answer

Comments

Question Tools

Stats

Related questions

Queries about sensors in simulation edit

Comments

1 Answer

Comments

Question Tools

Stats

Related questions

Queries about sensors in simulation