| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
I am using moveit to simulate a quadrupedal robot in Gazebo and ROS. Moving the four legs forward separately doesn't seem to be a problem but I can't figure out how to use moveit to move the base, which is basically should be done by actuating all the joints present in the four legs together appropriately.
This is a research question, not a software problem.
Current approaches include hard-coded joint trajectories, parameterized Cartesian splines, deep reinforcement learning, ...
Also you have to address the localization of your whole robot because stepping actions introduce noise and you end up not knowing where your robot is.
MoveIt does not give you an action than can directly move the base of the robot to a target point by moving the legs. If you write one that works in the real world, you will receive a PhD in the field, I guess.
Asked: 2018-06-06 22:13:51 -0500
Seen: 675 times
Last updated: Oct 20 '18
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
Hi,I've also try to use Moveit to simulate the quadruped, and how's going on your reaseach?
This is not an answer and rather a comment so please move it in appropriate location. Anyway is your quadruped is a sprawling configuration?
Is your quadruped is a sprawling configuration?