ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange
Ask Your Question

Using utm_odometry_node to convert GPS mesurement to obtain x y coordinates

asked 2011-03-21 23:54:50 -0500

this post is marked as community wiki

This post is a wiki. Anyone with karma >75 is welcome to improve it.

I'm Jurica, student at Faculty of Electrical Engineering and Computing (FER). I use ROS CTurtle (instaled in VirtualBox) and I wish to use utm_odometry_node(in gps_common package) to convert GPS latitude and longitude in (x y) coordinates.

I need convert these measurement because I will use them with odometry in EKF for robot localization in outdoor environment.

Except latitude and longitude (which i want to convert) I would use Direction(from north) and HDOP factor.(i use old msgs:gps_common/GPSStatus and gps_common/GPSFix)

So i read problem in gpsd_client tutorials( I was modified code explained there:

using namespace gps_common; // in original ansewr namespace is missing so code don't work

void callback(const gps_common::GPSFix::ConstPtr &msg){ // instead &msg there can be &fix
//  if(msg->status.status == GPSStatus::STATUS_NO_FIX){
//    std::cout <<"Unable to get a fix on the location." << std::endl;
//    return;
//  }
     std::cout << "Current Latutide:" << msg->latitude << std::endl;
     std::cout << "Current Longitude:" << msg->longitude << std::endl;
     std::cout << "Current Altitude:" << msg->altitude << std::endl;
     std::cout << "Direction(from north):" << msg->track << std::endl;
     std::cout << "HDOP:" << msg->hdop << std::endl;
     //std::cout << "Status:" << msg->status.status << std::endl;
     //std::cout << "Service:" << msg->status.service << std::endl;

int main(int argc, char **argv) {
  ros::NodeHandle nh;
  ros::Subscriber gps_sub=nh.subscribe("fix",1,callback);
  return 0;


So i ask if i can change utm_odometry_node somehow to use instead sensor_msgs/NavSatStatus and sensor_msgs/NavSatFix old msg tpye: gps_common/GPSStatus and gps_common/GPSFix. Old msg type have HDOP and Direction information and new don't have. (I use LS20030(USB interface) MTK Smart Antenna GPS reciever( Well if someone have some useful information i would be greatfull.

edit retag flag offensive close merge delete


See for a detailed discussion on why certain fields were included in NavSat* .
Eric Perko gravatar image Eric Perko  ( 2011-03-23 10:35:26 -0500 )edit
Ok i looked the code of utm_odometry_node in gps_common package and in C Turle this node is subscribing at gps_common/GPSFix(subscribing at fix topic) and gps_common/GPSStatus (subscribing at status topic)messages instead sensor_msgs/NavSatFix and sensor_msgs/NavSatStatus (which are msgs only for Diamondback valid),and publishing at topic odom(nav_msgs/Odometry).(For Diamond back subscribing topic is fix (sensor_msgs/NavSatFix), and publishing is odom (nav_msgs/Odometry)) ( So my orginal question is unnecesary, but now i have another question. Yesterday i wrote node for subscribing the odom topic(nav_msgs/Odometry) at which utm_odometry_node publish results of conversion from (latitude, longitude)(degres)to (x,y)(meters). So my question is is that conversion to (x,y) valid? Example: That gives gpsd_client: (coordinates in Croatia) latitude: 46.3954 longitude: 16.448 That gives utm_odometry_node: x:611320 y:5.139e+06 I think that in x ...(more)
Jurica gravatar image Jurica  ( 2011-03-24 04:01:08 -0500 )edit
If you found an "answer" to your original question, please post it as an answer so that it is easier to find if someone has this question in the future. As for your new question, please ask a new question for that so that there is only one question per question.
Eric Perko gravatar image Eric Perko  ( 2011-03-24 04:49:32 -0500 )edit
Also... just wondering but... how did you post a comment that is over 1000 characters long? I thought the comment limit was around 250-300 characters...
Eric Perko gravatar image Eric Perko  ( 2011-03-24 04:53:37 -0500 )edit
Yes i see that a comment is 300 character long. I just started typing and didn't worry about size of comment.
Jurica gravatar image Jurica  ( 2011-03-24 07:22:34 -0500 )edit
Weird... it always cuts me off... at the character limit...
Eric Perko gravatar image Eric Perko  ( 2011-03-24 07:23:10 -0500 )edit
I will answer to my question and ask a new question! Thanks for your comment!
Jurica gravatar image Jurica  ( 2011-03-24 07:23:28 -0500 )edit

2 Answers

Sort by ยป oldest newest most voted

answered 2011-03-24 07:43:11 -0500

this post is marked as community wiki

This post is a wiki. Anyone with karma >75 is welcome to improve it.

Here is simple code for node who is extracting X Y data form odom topic:

using namespace nav_msgs;

void callback(const OdometryConstPtr &odom){

std::cout << "X_gps[m]:" << odom->pose.pose.position.x << std::endl;
std::cout << "Y_gps[m]:" << odom->pose.pose.position.y << std::endl;

int main(int argc, char **argv){
ros::NodeHandle nh;

ros::Subscriber sub = nh.subscribe("odom",1,callback);

return 0;
edit flag offensive delete link more

answered 2011-03-24 07:40:27 -0500

this post is marked as community wiki

This post is a wiki. Anyone with karma >75 is welcome to improve it.

For users who use C Turtle and they want to use utm_odometry_node to convert latitude and longitude to x and y I wrote a node who is suscribing to odom topic which on which publish utm_odometry_node, and then extracting x and y. Subscribed Topics: fix(gps_common/GPSFix) status(gps_common/GPSStatus) Published Topics: odom(sensor_msgs/Odometry) That is in utm_odometry_node wrote for C Trutle, that node for Diamondback is using topics: Subscribed Topics: fix (sensor_msgs/NavSatFix) Published Topics: same as in C Turtle (odom(nav_msgs/Odometry)) (Some lines of utm_odometry_node are diferent in C Turtle and in Diamondback.)

edit flag offensive delete link more

Question Tools

1 follower


Asked: 2011-03-21 23:54:50 -0500

Seen: 5,626 times

Last updated: Apr 19 '11