ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange
Ask Your Question
0

rviz doesn't move my UR3 -> new node registered with same name

asked 2020-07-28 07:51:57 -0600

Eike2601 gravatar image

updated 2020-07-29 03:47:28 -0600

gvdhoorn gravatar image

Hello, I'm using ROS melodic on Ubuntu 18.04 with Kernel 5.3.0.59-generic a UR3 Robot

I folllowed the tutorial on Ur3_Tutorial and it works fine, using rosrun rqt_joint_trajectory_controller rqt_joint_trajectory_controller. I get the control panel which is able to change my robot in reallife.

But if I try to run it on moveit via Rviz (for this I use the command

roslaunch ur3_moveit_config demo.launch rviz_tutorial:=true

there occurs an error, that

Skipping virtual joint 'fixed_base' because its child frame 'base_link' does not match the URDF frame 'world'

So I searched for it and found out, that there has do made changes and addings in the URDF Folder rename 'world'...

But after I followed the advice of matteolucchi I receive the following new outputs every few seconds in the terminal:

robo@robo-ESPRIMO-P958:~$ roslaunch ur3_moveit_config demo.launch rviz_tutorial:=true
... logging to /home/robo/.ros/log/0a71de46-d0b6-11ea-8b8c-4c5262ae3479/roslaunch-robo-ESPRIMO-P958-984.log
Checking log directory for disk usage. This may take a while.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.

xacro: in-order processing became default in ROS Melodic. You can drop the option.
xacro: in-order processing became default in ROS Melodic. You can drop the option.
started roslaunch server http://robo-ESPRIMO-P958:45961/

SUMMARY
========

PARAMETERS
* /joint_state_publisher/use_gui: False
* /move_group/allow_trajectory_execution: True
* /move_group/capabilities: move_group/MoveGr...
* /move_group/controller_list: [{'joints': ['sho...
* /move_group/endeffector/planner_configs: ['SBLkConfigDefau...
* /move_group/jiggle_fraction: 0.05
* /move_group/manipulator/longest_valid_segment_fraction: 0.01
* /move_group/manipulator/planner_configs: ['SBLkConfigDefau...
* /move_group/max_range: 5.0
* /move_group/max_safe_path_cost: 1
* /move_group/moveit_controller_manager: moveit_fake_contr...
* /move_group/moveit_manage_controllers: True
* /move_group/octomap_resolution: 0.025
* /move_group/planner_configs/BKPIECEkConfigDefault/border_fraction: 0.9
* /move_group/planner_configs/BKPIECEkConfigDefault/failed_expansion_score_factor: 0.5
* /move_group/planner_configs/BKPIECEkConfigDefault/min_valid_path_fraction: 0.5
* /move_group/planner_configs/BKPIECEkConfigDefault/range: 0.0
* /move_group/planner_configs/BKPIECEkConfigDefault/type: geometric::BKPIECE
* /move_group/planner_configs/ESTkConfigDefault/goal_bias: 0.05
* /move_group/planner_configs/ESTkConfigDefault/range: 0.0
* /move_group/planner_configs/ESTkConfigDefault/type: geometric::EST
* /move_group/planner_configs/KPIECEkConfigDefault/border_fraction: 0.9
* /move_group/planner_configs/KPIECEkConfigDefault/failed_expansion_score_factor: 0.5
* /move_group/planner_configs/KPIECEkConfigDefault/goal_bias: 0.05
* /move_group/planner_configs/KPIECEkConfigDefault/min_valid_path_fraction: 0.5
* /move_group/planner_configs/KPIECEkConfigDefault/range: 0.0
* /move_group/planner_configs/KPIECEkConfigDefault/type: geometric::KPIECE
* /move_group/planner_configs/LBKPIECEkConfigDefault/border_fraction: 0.9
* /move_group/planner_configs/LBKPIECEkConfigDefault/min_valid_path_fraction: 0.5
* /move_group/planner_configs/LBKPIECEkConfigDefault/range: 0.0
* /move_group/planner_configs/LBKPIECEkConfigDefault/type: geometric::LBKPIECE
* /move_group/planner_configs/PRMkConfigDefault/max_nearest_neighbors: 10
* /move_group/planner_configs/PRMkConfigDefault/type: geometric::PRM
* /move_group/planner_configs/PRMstarkConfigDefault/type: geometric::PRMstar
* /move_group/planner_configs/RRTConnectkConfigDefault/range: 0.0
* /move_group/planner_configs/RRTConnectkConfigDefault/type: geometric::RRTCon...
* /move_group/planner_configs/RRTkConfigDefault/goal_bias: 0.05
* /move_group/planner_configs/RRTkConfigDefault/range: 0.0
* /move_group/planner_configs/RRTkConfigDefault/type: geometric::RRT
* /move_group/planner_configs/RRTstarkConfigDefault/delay_collision_checking: 1
* /move_group/planner_configs/RRTstarkConfigDefault/goal_bias: 0.05
* /move_group/planner_configs/RRTstarkConfigDefault/range: 0.0
* /move_group/planner_configs/RRTstarkConfigDefault/type: geometric::RRTstar
* /move_group/planner_configs/SBLkConfigDefault/range: 0.0
* /move_group/planner_configs/SBLkConfigDefault/type: geometric::SBL
* /move_group/planner_configs/TRRTkConfigDefault/frountierNodeRatio: 0.1
* /move_group/planner_configs/TRRTkConfigDefault/frountier_threshold: 0.0
* /move_group/planner_configs/TRRTkConfigDefault/goal_bias: 0.05
* /move_group/planner_configs/TRRTkConfigDefault/init_temperature: 10e-6
* /move_group/planner_configs/TRRTkConfigDefault/k_constant: 0.0
* /move_group/planner_configs/TRRTkConfigDefault/max_states_failed: 10
* /move_group/planner_configs/TRRTkConfigDefault/min_temperature: 10e-10
* /move_group/planner_configs/TRRTkConfigDefault/range: 0.0
* /move_group/planner_configs/TRRTkConfigDefault/temp_change_factor: 2.0
* /move_group/planner_configs/TRRTkConfigDefault ...
(more)
edit retag flag offensive close merge delete

1 Answer

Sort by ยป oldest newest most voted
0

answered 2020-08-14 01:57:29 -0600

HappyBit gravatar image

Hi Eike,

Just from looking at the output this part here seems interesting:

[robot_state_publisher-2] restarting process
process[robot_state_publisher-2]: started with pid [1077]
[ WARN] [1595938834.398876906]: Shutdown request received.
[ WARN] [1595938834.399438372]: Reason given for shutdown: [new node registered with same name]

[new node registered with same name] indicates that your robot_state_publisher is being restarted in another launch file. Can you provide the launch files you are using or link your project?

edit flag offensive delete link more

Question Tools

2 followers

Stats

Asked: 2020-07-28 07:51:57 -0600

Seen: 169 times

Last updated: Aug 14 '20