How to I set a robot pose in stage
Hi
is it possible to set the pose [x,y, alpha] of the simulated robot in stage via ROS?
Greetings
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Hi
is it possible to set the pose [x,y, alpha] of the simulated robot in stage via ROS?
Greetings
Are you talking about setting the initial position? You can set this by modifying your .world file. Example:
roomba( pose [ 3.2 8 0 0 ] name "roomba_0" color "red")
where roomba is the name of the model of my robot. The first argument of pose is the x position, the second is y position, third z position and the last is the orientation of the robot.
Another way to set the robot's position is to click on it and drag to the desired position.
Hello Lucas I would like to set the robots pose while the simulator is running.
If you want to set the robot's position while the simulator is running, you can click on the robot and drag it to the position that you want.
Hello and thanks for your comments. But I like to set and change the pose of the robot while the simulation is running. I have to run tests and I do not want to place the robot always with the mouse. Greetings and thanks again
Hello,did you find a solution to this? can you share it? thanks
In agreement with lucascoelho, I cite an example. If you check out this tutorial, http://www.ros.org/wiki/stage/Tutorials/IntroductiontoStageControllers and have a look at the roomba-wander.world file, then
pose [ -8 6 0 0 ]
is the pose [x y z alpha] that you are looking for; x = -8, y = 6, z = 0 and alpha = 0.
Once the simulation has started, you can see the realtime pose, by clicking on the robot.
Hello Arkapravo, I would like to set the robots pose while the simulator is running. Any ideas?
Asked: 2012-03-12 04:34:05 -0500
Seen: 2,606 times
Last updated: Mar 12 '12
Turtlebot3 doesn't move in a straight line while sending goals to Nav_stack!
Equivalent turtlesim/Pose and geometry_msgs/Pose
how using robot pose publisher for links in arm robot?? [closed]
Camera Pose Calibration Valid_Pattern_Ratio_Threshold and Circle Spacing
Pose and orientation of my robot is incorrect in Gazebo and RViz
SLAM simulation without any hardwares
Gazebo simulated robot imu has erratic movement while stationary
I would like to set the robots pose while the simulator is running. Any ideas?
@Markus Bader Have a look, http://answers.ros.org/question/12384/change-simulator-stage-model-configurations-in