Ask Your Question

Mathias Lüdtke's profile - karma

Mathias Lüdtke's karma change log

15 0 ros_canopen dcf_overlay setting ( 2019-09-20 02:12:05 -0500 )

15 0 Use rosparam get in launch file ( 2019-09-18 19:13:29 -0500 )

10 0 Schunk lwa4p random stops with ros_canopen ( 2019-09-06 10:05:31 -0500 )

10 0 ros_canopen interpolated position mode, time period? ( 2019-09-02 11:59:06 -0500 )

15 0 ros_canopen interpolated position mode, time period? ( 2019-09-02 11:59:04 -0500 )

10 0 ros_canopen interpolated position mode, time period? ( 2019-09-02 10:57:15 -0500 )

10 0 error in socketcan-demo ( 2019-08-22 19:01:54 -0500 )

10 0 ros_canopen Profile position + Interpolated position modes ( 2019-08-20 03:08:55 -0500 )

15 0 ros_canopen Profile position + Interpolated position modes ( 2019-08-20 03:08:54 -0500 )

15 0 canopen master hard- and software advice ( 2019-08-19 15:01:39 -0500 )

15 0 ros_canopen: virtual joints, is it possible? ( 2019-08-19 14:58:56 -0500 )

10 0 ros_canopen vel_from_device: (obj606C) issue ( 2019-08-17 05:06:53 -0500 )

15 0 ros_canopen vel_from_device: (obj606C) issue ( 2019-08-16 02:26:39 -0500 )

10 0 ros_canopen vel_from_device: (obj606C) issue ( 2019-08-15 12:04:29 -0500 )

10 0 motor oscillates after diff_drive_controller configuration ( 2019-07-22 11:56:23 -0500 )

15 0 motor oscillates after diff_drive_controller configuration ( 2019-07-22 11:56:19 -0500 )

0 -10 Emergency error of Schunk PG70 ( 2019-07-12 10:52:50 -0500 )

10 0 Emergency error of Schunk PG70 ( 2019-07-12 10:52:49 -0500 )

15 0 Emergency error of Schunk PG70 ( 2019-07-12 04:28:35 -0500 )

10 0 Emergency error of Schunk PG70 ( 2019-07-11 08:37:20 -0500 )

15 0 Schunk LWA4P initialization problem with ros_canopen ( 2019-06-25 07:10:01 -0500 )

0 -15 Schunk LWA4P initialization problem with ros_canopen ( 2019-06-25 07:09:54 -0500 )

15 0 Schunk LWA4P initialization problem with ros_canopen ( 2019-06-25 07:09:34 -0500 )

10 0 ros_canopen homing simultaneously or one-by-one? ( 2019-06-22 04:25:29 -0500 )

15 0 ros_canopen homing simultaneously or one-by-one? ( 2019-06-22 04:25:25 -0500 )

2 0 Is it possible to use kvaser (can to USB) to read canopen device? ( 2019-04-30 12:04:51 -0500 )

0 -2 Is it possible to use kvaser (can to USB) to read canopen device? ( 2019-04-30 12:04:49 -0500 )

15 0 Ros Canopen PositionJointInterface working with mode 3? ( 2019-04-08 01:20:51 -0500 )

15 0 Is there any way using ros canopen with JointTrajectoryController by profile position mode ( 2019-04-08 01:20:48 -0500 )

15 0 canopen_chain_node and init device ( 2019-04-08 01:20:44 -0500 )

15 0 canopen_chain_node to read dictionary entries only ( 2019-04-08 01:08:57 -0500 )

15 0 SocketCan Bridge error when connecting multiple nodes to bus ( 2019-04-07 22:34:09 -0500 )

10 0 How to use controller_manager with ros_canopen ( 2019-03-02 20:24:45 -0500 )

15 0 ROS_CanOpen Ixxat USB to can converter ( 2019-03-01 16:36:20 -0500 )

15 0 ros_canopen reset encoders? ( 2019-02-13 07:04:33 -0500 )

10 0 CANopen test based on the canopen_test_utils package ( 2019-01-29 07:51:40 -0500 )

10 0 [SOLVED] ros_canopen ERROR after spawning controllers ( 2019-01-29 07:51:31 -0500 )

10 0 [SOLVED] ros_canopen: "Did not receive a response message" ( 2019-01-29 07:50:43 -0500 )

0 -10 [SOLVED] ros_canopen: "Did not receive a response message" ( 2019-01-29 07:50:41 -0500 )

10 0 ros_canopen and Maxon EPOS2. Could not switch controller. ( 2019-01-29 07:50:30 -0500 )

10 0 ROS_canopen correct PDO mapping + EDS modifications? ( 2019-01-29 07:49:43 -0500 )

0 -10 roslibpy: why does TFClient seem to ignore the rate parameter? ( 2019-01-28 17:25:51 -0500 )

0 -15 roslibpy: why does TFClient seem to ignore the rate parameter? ( 2019-01-28 17:19:45 -0500 )

10 0 roslibpy: why does TFClient seem to ignore the rate parameter? ( 2019-01-28 16:29:36 -0500 )

15 0 roslibpy: why does TFClient seem to ignore the rate parameter? ( 2019-01-28 16:29:35 -0500 )

10 0 How to use controller_manager with ros_canopen ( 2019-01-28 03:49:45 -0500 )

15 0 How to use controller_manager with ros_canopen ( 2019-01-28 03:49:43 -0500 )

10 0 canopen master hard- and software advice ( 2018-12-27 05:33:38 -0500 )

10 0 How to control Maxon Motor by using ROS_CANopen ( 2018-10-31 06:20:44 -0500 )

10 0 differential transmission with ros_canopen, HOW to? ( 2018-10-08 14:51:37 -0500 )

15 0 differential transmission with ros_canopen, HOW to? ( 2018-10-08 14:51:35 -0500 )

10 0 roscanopen SDO or PDO for service calls? ( 2018-09-20 06:30:50 -0500 )

10 0 roscanopen SDO or PDO for service calls? ( 2018-09-18 07:31:41 -0500 )

15 0 roscanopen + cyclic position mode + nanotec controller ( 2018-09-14 17:37:29 -0500 )

10 0 canopen master hard- and software advice ( 2018-08-14 07:28:49 -0500 )

0 -10 canopen master hard- and software advice ( 2018-08-14 07:28:48 -0500 )

10 0 canopen master hard- and software advice ( 2018-08-07 08:04:31 -0500 )

10 0 ros_canopen: virtual joints, is it possible? ( 2018-07-30 11:23:48 -0500 )

10 0 canopen master hard- and software advice ( 2018-07-25 06:00:35 -0500 )

10 0 [SOLVED] ros_canopen: "Did not receive a response message" ( 2018-07-18 06:42:42 -0500 )

10 0 Can't build ipa_canopen ( 2018-07-18 06:29:11 -0500 )

10 0 [SOLVED] ros_canopen: "Did not receive a response message" ( 2018-07-05 07:04:41 -0500 )

15 0 roscanopen + joint_trajectory_controller + Interpolated Position Mode ( 2018-06-26 02:38:52 -0500 )

15 0 profile position mode + ros canopen ( 2018-06-26 02:38:35 -0500 )

15 0 ros-canopen publishing ( 2018-06-26 02:38:24 -0500 )

10 0 [SOLVED] ros_canopen ERROR after spawning controllers ( 2018-06-21 10:13:22 -0500 )

15 0 CANopen test based on the canopen_test_utils package ( 2018-06-21 09:20:50 -0500 )

10 0 CANopen test based on the canopen_test_utils package ( 2018-06-21 08:47:35 -0500 )

0 -10 CANopen test based on the canopen_test_utils package ( 2018-06-21 08:47:34 -0500 )

10 0 CANopen test based on the canopen_test_utils package ( 2018-06-20 12:16:02 -0500 )

15 0 ROS_canopen correct PDO mapping + EDS modifications? ( 2018-06-20 12:01:07 -0500 )

10 0 ROS_canopen correct PDO mapping + EDS modifications? ( 2018-06-20 12:00:05 -0500 )

10 0 Schunk_lwa4d problem initialising with ros_canopen ( 2018-04-30 13:37:25 -0500 )

15 0 Schunk_lwa4d problem initialising with ros_canopen ( 2018-04-30 10:22:02 -0500 )

10 0 Schunk_lwa4d problem initialising with ros_canopen ( 2018-04-30 10:22:01 -0500 )

15 0 Mapping between PWM counts and joint angle in ros_canopen ( 2018-04-29 22:10:14 -0500 )

15 0 Canopen_motor_node, Error document empty ( 2018-03-09 06:51:47 -0500 )

10 0 Canopen_motor_node, Error document empty ( 2018-03-07 11:05:19 -0500 )

15 0 canopen chain node exit with error code -11 ( 2018-02-14 07:59:22 -0500 )

10 0 canopen chain node exit with error code -11 ( 2018-02-14 07:19:23 -0500 )

15 0 ros_canopen did not receive a response message ( 2017-11-28 13:00:09 -0500 )

10 0 Does canopen_chain_node create local node? ( 2017-11-15 08:47:45 -0500 )

10 0 Running a canopen node using only canopen_chain_node and canopen_master ( 2017-11-15 08:13:15 -0500 )

10 0 Does canopen_chain_node create local node? ( 2017-11-15 08:07:32 -0500 )

0 -10 Does canopen_chain_node create local node? ( 2017-11-15 08:07:31 -0500 )

10 0 Does canopen_chain_node create local node? ( 2017-11-15 08:07:28 -0500 )

15 0 Does canopen_chain_node create local node? ( 2017-11-15 08:07:13 -0500 )

0 -15 Does canopen_chain_node create local node? ( 2017-11-15 08:07:08 -0500 )

15 0 Does canopen_chain_node create local node? ( 2017-11-15 08:07:05 -0500 )

15 0 Running a canopen node using only canopen_chain_node and canopen_master ( 2017-11-10 04:04:19 -0500 )

15 0 error in socketcan-demo ( 2017-10-02 20:22:37 -0500 )

10 0 How to control Maxon Motor by using ROS_CANopen ( 2017-09-23 07:17:50 -0500 )

15 0 ROS_CANopen can't start velocity_controller and trajectory_controller ( 2017-09-13 19:36:43 -0500 )

10 0 Running Can Radar on Ros through Raspberry Pi 2 ( 2017-09-08 14:42:36 -0500 )

15 0 socketcan_bridge_node error handling ( 2017-08-07 01:20:17 -0500 )

10 0 socketcan_bridge_node error handling ( 2017-08-07 01:20:14 -0500 )

15 0 Schunk_lwa4p initialization error with ros_canopen ( 2017-07-14 06:04:39 -0500 )

10 0 Schunk_lwa4p initialization error with ros_canopen ( 2017-07-14 06:04:37 -0500 )

15 0 Running Can Radar on Ros through Raspberry Pi 2 ( 2017-05-02 15:06:04 -0500 )

15 0 CANopen NMT broadcast (using NodeId 0) support ( 2017-04-20 15:13:05 -0500 )