dinamex's profile - overview

● Commentator   × 1

• How to install yaml-cpp0.2.6-dev / How to install from source correctly

● Editor   × 1

• rosinstall behind Proxy

● Scholar   × 1

• video stream between multiple maschines

● Supporter   × 1

• Difference between two versions of openni_launch

● Good Question   × 5

• load calibration file
• usb_cam package as nodelet
• ROS Fuerte and PCL from source on ARM / Hard-float support
• autostart a launchfile after/while boot
• can't set any settings for uvc_camera

● Great Question   × 2

• autostart a launchfile after/while boot
• ROS Fuerte and PCL from source on ARM / Hard-float support

● Famous Question   × 43

• singleshot / photo with webcamera
• ROS Fuerte and PCL from source on ARM / Hard-float support
• How to install yaml-cpp0.2.6-dev / How to install from source correctly
• can't set any settings for uvc_camera
• rosinstall behind Proxy
• manual focus with usb_cam
• usb_cam on pandaboard / fatal error: libavcodec/avcodec.h
• Singelshot from multiple Kinects / synchronize Kinects
• Will this Project be possible? / ROS Time Syncronisation
• Problem to start roscore on ARM + Ubuntu 12.04
• can't launch openni on Pandaboard
• Ubuntu 12.04 and Pandaboard -> fails to open ASUS xtion/ Driver issues for ARM
• pcl_trunk and fuerte / source install for hardfp support
• ROS offline installation
• Openni_launch failure / "cannot launch node of type [nodelet/nodelet]"
• enable depth regristration by default (openni_launch)
• add system dependecies installed from source to rosdep check
• can just subscribe once to openni topics
• openni and ar bounding box doesn't work well together
• Time difference in showed and actual webcam image
• video stream between multiple maschines
• simple pointcloud subscriber
• callback for two topics at the same time
• autostart a launchfile after/while boot
• RGBDslam:negative mahalanobis distance
• load calibration file
• camera_pose_calibration not working in fuerte
• codec type or id mismatches when using usb_cam
• how can I register a Callback when using ros::spinOnce ?
• usb camera driver with h.264 support
• Kinect calibration "Unknown OpenCV format yuv422"
• ApproximateTime Policy of message filter doesn't filter right
• reconfigure parameters for uvc_camera or uvc_cam2
• How to write depth image to a bag right.
• rgbdslam with single rgb and depth images
• uvc_cam with mjpg pixelformat
• Asctec Pelican white screen ? no video signal
• why is it just one kinect per USB host?
• eclipse is not using namespace
• usb_cam package as nodelet
• how to save depth image loss-less to disk
• how to convert/save pointcloud2 into ply with ROS electric (pcl1.1)
• interpolate pointcloud

● Notable Question   × 43

• singleshot / photo with webcamera
• ROS Fuerte and PCL from source on ARM / Hard-float support
• How to install yaml-cpp0.2.6-dev / How to install from source correctly
• can't set any settings for uvc_camera
• rosinstall behind Proxy
• manual focus with usb_cam
• usb_cam on pandaboard / fatal error: libavcodec/avcodec.h
• Singelshot from multiple Kinects / synchronize Kinects
• Problem to start roscore on ARM + Ubuntu 12.04
• Ubuntu 12.04 and Pandaboard -> fails to open ASUS xtion/ Driver issues for ARM
• pcl_trunk and fuerte / source install for hardfp support
• Will this Project be possible? / ROS Time Syncronisation
• can't launch openni on Pandaboard
• ROS offline installation
• Openni_launch failure / "cannot launch node of type [nodelet/nodelet]"
• enable depth regristration by default (openni_launch)
• add system dependecies installed from source to rosdep check
• can just subscribe once to openni topics
• Asctec Pelican white screen ? no video signal
• callback for two topics at the same time
• openni and ar bounding box doesn't work well together
• Time difference in showed and actual webcam image
• codec type or id mismatches when using usb_cam
• usb camera driver with h.264 support
• video stream between multiple maschines
• load calibration file
• camera_pose_calibration not working in fuerte
• usb_cam package as nodelet
• simple pointcloud subscriber
• autostart a launchfile after/while boot
• how can I register a Callback when using ros::spinOnce ?
• RGBDslam:negative mahalanobis distance
• ApproximateTime Policy of message filter doesn't filter right
• how to convert/save pointcloud2 into ply with ROS electric (pcl1.1)
• rgbdslam with single rgb and depth images
• reconfigure parameters for uvc_camera or uvc_cam2
• uvc_cam with mjpg pixelformat
• eclipse is not using namespace
• Kinect calibration "Unknown OpenCV format yuv422"
• how to save depth image loss-less to disk
• interpolate pointcloud
• How to write depth image to a bag right.
• why is it just one kinect per USB host?

● Popular Question   × 43

• rosinstall behind Proxy
• singleshot / photo with webcamera
• ROS Fuerte and PCL from source on ARM / Hard-float support
• How to install yaml-cpp0.2.6-dev / How to install from source correctly
• can't set any settings for uvc_camera
• manual focus with usb_cam
• usb_cam on pandaboard / fatal error: libavcodec/avcodec.h
• Singelshot from multiple Kinects / synchronize Kinects
• Problem to start roscore on ARM + Ubuntu 12.04
• Ubuntu 12.04 and Pandaboard -> fails to open ASUS xtion/ Driver issues for ARM
• pcl_trunk and fuerte / source install for hardfp support
• Will this Project be possible? / ROS Time Syncronisation
• can't launch openni on Pandaboard
• ROS offline installation
• Openni_launch failure / "cannot launch node of type [nodelet/nodelet]"
• enable depth regristration by default (openni_launch)
• add system dependecies installed from source to rosdep check
• can just subscribe once to openni topics
• Asctec Pelican white screen ? no video signal
• callback for two topics at the same time
• openni and ar bounding box doesn't work well together
• Time difference in showed and actual webcam image
• how to convert/save pointcloud2 into ply with ROS electric (pcl1.1)
• codec type or id mismatches when using usb_cam
• usb_cam package as nodelet
• usb camera driver with h.264 support
• load calibration file
• camera_pose_calibration not working in fuerte
• video stream between multiple maschines
• interpolate pointcloud
• autostart a launchfile after/while boot
• uvc_cam with mjpg pixelformat
• how can I register a Callback when using ros::spinOnce ?
• reconfigure parameters for uvc_camera or uvc_cam2
• ApproximateTime Policy of message filter doesn't filter right
• simple pointcloud subscriber
• eclipse is not using namespace
• rgbdslam with single rgb and depth images
• RGBDslam:negative mahalanobis distance
• How to write depth image to a bag right.
• how to save depth image loss-less to disk
• Kinect calibration "Unknown OpenCV format yuv422"
• why is it just one kinect per USB host?

● Teacher   × 1

• Running openni_camera and an additional external USB camera

● Student   × 1

• How to install yaml-cpp0.2.6-dev / How to install from source correctly

● Organizer   × 1

• Problem to start roscore on ARM + Ubuntu 12.04

● Nice Question   × 6

• ROS Fuerte and PCL from source on ARM / Hard-float support
• autostart a launchfile after/while boot
• can't set any settings for uvc_camera
• usb camera driver with h.264 support
• load calibration file
• usb_cam package as nodelet

● Nice Answer   × 1

• erros in eclipse C++ by opening file from ros tutorial

● Necromancer   × 1

• ROS Fuerte and PCL from source on ARM / Hard-float support

● Self-Learner   × 2

• ROS Fuerte and PCL from source on ARM / Hard-float support
• ApproximateTime Policy of message filter doesn't filter right

● Stellar Question   × 1

• autostart a launchfile after/while boot

● Favorite Question   × 2

• ROS Fuerte and PCL from source on ARM / Hard-float support
• autostart a launchfile after/while boot