Ask Your Question

Revision history [back]

How to force kinect to a certain USB 2.0 BUS

I've got laptop with 4 usb BUS inside, 3 of them are usb 2.0. And I have 4 usb ports on side of my laptop, 3 of them are usb 2.0 PORT and one is 3.0 port. I want to connect 2 kinects to 2 of my usb 2.0 BUS, But no matter which usb 2.0 PORT I connect the Kinects to, they alwas goes in the same usb 2.0 BUS, hence I can only get data out of one Kinect, since one kinect will cost the whole bandwidth of a usb 2.0 BUS.

here's my lsusb results:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 017: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 018: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 019: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 020: ID 045e:02ae Microsoft Corp. Xbox NUI Camera
Bus 001 Device 003: ID 13d3:5205 IMC Networks 
Bus 002 Device 016: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 021: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 022: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 023: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 024: ID 045e:02ae Microsoft Corp. Xbox NUI Camera

any suggestions?

How to force kinect to a certain USB 2.0 BUS

I've got laptop with 4 usb BUS inside, 3 of them are usb 2.0. And I have 4 usb ports on side of my laptop, 3 of them are usb 2.0 PORT and one is 3.0 port. I want to connect 2 kinects to 2 of my usb 2.0 BUS, But no matter which usb 2.0 PORT I connect the Kinects to, they alwas goes in the same usb 2.0 BUS, hence I can only get data out of one Kinect, since one kinect will cost the whole bandwidth of a usb 2.0 BUS.

here's my lsusb results:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 017: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 018: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 019: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 020: ID 045e:02ae Microsoft Corp. Xbox NUI Camera
Bus 001 Device 003: ID 13d3:5205 IMC Networks 
Bus 002 Device 016: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 021: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 022: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 023: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 024: ID 045e:02ae Microsoft Corp. Xbox NUI Camera

any I want to force one kinect to use BUS 01 instead of BUS 02, but I don't know how. Any suggestions? Where can I find more information on that?

How to force kinect to a certain USB 2.0 BUS

I've got laptop with 4 usb BUS inside, 3 of them are usb 2.0. And I have 4 usb ports on side of my laptop, 3 of them are usb 2.0 PORT and one is 3.0 port. I want to connect 2 kinects to 2 of my usb 2.0 BUS, But no matter which usb 2.0 PORT I connect the Kinects to, they alwas goes in the same usb 2.0 BUS, hence I can only get data out of one Kinect, since one kinect will cost the whole bandwidth of a usb 2.0 BUS.

here's my lsusb results:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 017: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 018: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 019: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 020: ID 045e:02ae Microsoft Corp. Xbox NUI Camera
Bus 001 Device 003: ID 13d3:5205 IMC Networks 
Bus 002 Device 016: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 021: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 022: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 023: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 024: ID 045e:02ae Microsoft Corp. Xbox NUI Camera

I want to force one kinect to use BUS 01 instead of BUS 02, but I don't know how. Any suggestions? Where can I find more information on that?

How to force kinect to a certain USB 2.0 BUS

I've got laptop with 4 usb BUS inside, 3 of them are usb 2.0. And I have 4 usb ports on side of my laptop, 3 of them are usb 2.0 PORT and one is 3.0 port. I want to connect 2 kinects to 2 of my usb 2.0 BUS, But no matter which usb 2.0 PORT I connect the Kinects to, they alwas goes in the same usb 2.0 BUS, hence I can only get data out of one Kinect, since one kinect will cost the whole bandwidth of a usb 2.0 BUS.

here's my lsusb results:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 017: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 018: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 019: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 020: ID 045e:02ae Microsoft Corp. Xbox NUI Camera
Bus 001 Device 003: ID 13d3:5205 IMC Networks 
Bus 002 Device 016: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 021: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 022: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 023: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 024: ID 045e:02ae Microsoft Corp. Xbox NUI Camera

I want to force one kinect to use BUS 01 instead of BUS 02, but I don't know how. Any suggestions? Where can I find more information on that?

How to force kinect to a certain USB 2.0 BUS

I've got laptop with 4 usb BUS inside, 3 of them are usb 2.0. And I have 4 usb ports on side of my laptop, 3 of them are usb 2.0 PORT and one is 3.0 port. I want to connect 2 kinects to 2 of my usb 2.0 BUS, But no matter which usb 2.0 PORT I connect the Kinects to, they alwas goes in the same usb 2.0 BUS, hence I can only get data out of one Kinect, since one kinect will cost the whole bandwidth of a usb 2.0 BUS.

here's my lsusb results:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 017: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 018: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 019: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 020: ID 045e:02ae Microsoft Corp. Xbox NUI Camera
Bus 001 Device 003: ID 13d3:5205 IMC Networks 
Bus 002 Device 016: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 021: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 022: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 023: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 024: ID 045e:02ae Microsoft Corp. Xbox NUI Camera

I want to force one kinect to use BUS 01 instead of BUS 02, but I don't know how. Any suggestions? Where can I find more information on that?

How to force kinect to a certain USB 2.0 BUS

I've got laptop with 4 usb BUS inside, 3 of them are usb 2.0. And I have 4 usb ports on side of my laptop, 3 of them are usb 2.0 PORT and one is 3.0 port. I want to connect 2 kinects to 2 of my usb 2.0 BUS, But no matter which usb 2.0 PORT I connect the Kinects to, they alwas goes in the same usb 2.0 BUS, hence I can only get data out of one Kinect, since one kinect will cost the whole bandwidth of a usb 2.0 BUS.

here's my lsusb results:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 017: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 018: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 019: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 020: ID 045e:02ae Microsoft Corp. Xbox NUI Camera
Bus 001 Device 003: ID 13d3:5205 IMC Networks 
Bus 002 Device 016: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 021: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 022: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 023: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 024: ID 045e:02ae Microsoft Corp. Xbox NUI Camera

I want to force one kinect to use BUS 01 instead of BUS 02, but I don't know how. Any suggestions? Where can I find more information on that?

How to force kinect to a certain USB 2.0 BUS

I've got laptop with 4 usb BUS inside, 3 of them are usb 2.0. And I have 4 usb ports on side of my laptop, 3 of them are usb 2.0 PORT and one is 3.0 port. I want to connect 2 kinects to 2 of my usb 2.0 BUS, But no matter which usb 2.0 PORT I connect the Kinects to, they alwas goes in the same usb 2.0 BUS, hence I can only get data out of one Kinect, since one kinect will cost the whole bandwidth of a usb 2.0 BUS.

here's my lsusb results:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 017: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 018: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 019: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 020: ID 045e:02ae Microsoft Corp. Xbox NUI Camera
Bus 001 Device 003: ID 13d3:5205 IMC Networks 
Bus 002 Device 016: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 021: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 022: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 002 Device 023: ID 045e:02ad Microsoft Corp. Xbox NUI Audio
Bus 002 Device 024: ID 045e:02ae Microsoft Corp. Xbox NUI Camera

I want to force one kinect to use BUS 01 instead of BUS 02, but I don't know how. Any suggestions? Where can I find more information on that?