Ask Your Question
1

Groovy Source Install "rosmake -a" Build Error

asked 2013-01-19 09:43:34 -0500

Donny3000 gravatar image

Hello All,

I've been trying to install ROS Groovy from source (following the online instruction from the wiki) on my 32-bit Ubuntu 12.04 VM and have been making some progress. But, I'm running into build problems when I execute the last step of the instructions, 2.2.3 Build the ROS Stack with the following commands:

$ source ~/ros_ws/setup.bash
$ rosmake -a

The starts of fine, but then errors out with the following error:

[ rosmake ] All 21 linesostmap_2d: 5.3 sec ] [ voxel_grid: 5.3 sec ] [ bfl: 5.3 sec ] [ smach_msgs: 5.3 sec ] [ filters: 5.2 sec ] [ map_server: 5.2... [ 8 Active 53/84 Complete ]
{-------------------------------------------------------------------------------
  mkdir -p bin
  cd build && cmake -Wdev -DCMAKE_TOOLCHAIN_FILE=/opt/ros/ros_catkin_ws/install_isolated/share/ros/core/rosbuild/rostoolchain.cmake  ..
  [rosbuild] Building package costmap_2d
  Failed to invoke /opt/ros/ros_catkin_ws/install_isolated/bin/rospack deps-manifests costmap_2d
  [rospack] Error: package/stack 'costmap_2d' depends on non-existent package 'laser_geometry' and rosdep claims that it is not a system dependency. Check the ROS_PACKAGE_PATH or try calling 'rosdep update'


  CMake Error at /opt/ros/ros_catkin_ws/install_isolated/share/ros/core/rosbuild/public.cmake:129 (message):


    Failed to invoke rospack to get compile flags for package 'costmap_2d'.
    Look above for errors from rospack itself.  Aborting.  Please fix the
    broken dependency!

  Call Stack (most recent call first):
    /opt/ros/ros_catkin_ws/install_isolated/share/ros/core/rosbuild/public.cmake:203 (rosbuild_invoke_rospack)
    CMakeLists.txt:4 (rosbuild_init)


  -- Configuring incomplete, errors occurred!
-------------------------------------------------------------------------------}
[ rosmake ] Output from build of package costmap_2d written to:
[ rosmake ]    /home/donny3000/.ros/rosmake/rosmake_output-20130119-153040/costmap_2d/build_output.log             
[rosmake-2] Finished <<< costmap_2d [FAIL] [ 5.32 seconds ]                                                                                                                        
[ rosmake ] Halting due to failure in package costmap_2d. 
[ rosmake ] Waiting for other threads to complete.                                                                      
[ rosmake ] Output from build of package bfl written to:7 sec ] [ smach_msgs: 11.7 sec ] [ filters: 11.7 sec ] [ map_server: 11.6 sec ] [ fake_local... [ 7 Active 53/84 Complete ]
[ rosmake ]    /home/donny3000/.ros/rosmake/rosmake_output-20130119-153040/bfl/build_output.log                           
[rosmake-5] Finished <<< bfl [PASS] [ 11.69 seconds ] [ 2 warnings  ]                                                                                                              
[rosmake-4] Finished <<< smach_msgs [PASS] [ 12.18 seconds ]                                                                                                                       
[rosmake-0] Finished <<< python_orocos_kdl [PASS] [ 11.60 seconds ]                                                                                                                
[rosmake-7] Finished <<< map_server [PASS] [ 18.90 seconds ]                                                                                                                       
[rosmake-1] Finished <<< voxel_grid [PASS] [ 18.95 seconds ]                                                                                                                       
[rosmake-3] Finished <<< filters [PASS] [ 19.06 seconds ]                                                                                                                          
[rosmake-6] Finished <<< fake_localization [PASS] [ 19.20 seconds ]                                                                                                                
[ rosmake ] Results:                                                                                                                                                               
[ rosmake ] Built 61 packages with 1 failures.                                                                                                                                     
[ rosmake ] Summary output to directory                                                                                                                                            
[ rosmake ] /home/donny3000/.ros/rosmake/rosmake_output-20130119-153040

I've been trying to debug this, but since I'm new to ROS I haven't been able to get very far.

Has anyone else encountered this problem or a similar problem that would be able to point me in the right direction? Maybe it's something that I'm overlooking? Thanks in advance!

edit retag flag offensive close merge delete

2 Answers

Sort by ยป oldest newest most voted
1

answered 2013-01-19 16:39:32 -0500

Donny3000 gravatar image

The solution that I found at this time to get the rosmake -a step (the last step) to work is to delete the laser_pipeline folder (i'm working with the mobile variant) in the rosbuild workspace and clone the laser_pipeline stack from https://github.com/ros-perception/laser_pipeline.

$ git clone https://github.com/ros-perception/laser_pipeline.git

Then checkout the latest branch (at the time of this post laser_pipeline-1.5.3)

$ cd laser_pipeline
$ git checkout laser_pipeline-1.5.3

Then re-run the rosmake -a command. This is what worked for me to get my workspace built.

edit flag offensive delete link more
-1

answered 2013-01-19 13:12:23 -0500

joq gravatar image

The laser_geometry package is not a system dependency, it is a ROS package.

To install it, run:

$ sudo apt-get install ros-groovy-laser-geometry
edit flag offensive delete link more

Comments

Thanks for your response joq. But, if I install from source, shouldn't that have already have been download in step 2.1.1 & 2.2? If not, where can I download the source and build it? I looked at the link you posted and cloned the git repo to build it, but nothing happened. How do you build it?

Donny3000 gravatar imageDonny3000 ( 2013-01-19 15:23:18 -0500 )edit

Your Answer

Please start posting anonymously - your entry will be published after you log in or create a new account.

Add Answer

Question Tools

Stats

Asked: 2013-01-19 09:43:34 -0500

Seen: 602 times

Last updated: Jan 19 '13