ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange
Ask Your Question
0

[ROS2 Foxy]RVIZ crashes when using Nav2- Turtlebot3

asked 2022-06-11 02:29:59 -0500

sdr_tb3 gravatar image

updated 2022-06-13 07:34:19 -0500

Hi everyone,

I am currently working on my masters degree project - I am using Turtlebot3(Raspberry pi 3B+ version)

  • I am using ROS2 Foxy on a ubuntu Dualboot(installed alongside windows)

  • I use this command on my ubuntu to launch the navigation2: ros2 launch turtlebot3_navigation2 navigation2.launch.py map:=/path/to/map This is the default launch file and I haven't made any changes to it.

  • I am facing the following errors when I run the navigation2 with RVIZ. These errors seems to occur randomly.

  • InternalErrorException: Cannot create GL vertex buffer in GLHardwareVertexBuffer::GLHardwareVertexBuffer at /tmp/binarydeb/ros-foxy-rviz-ogre-vendor-8.2.6/obj-x86_64-linux-gnu/ogre-v1.12.1-prefix/src/ogre-v1.12.1/RenderSystems/GL/src/OgreGLHardwareVertexBuffer.cpp (line 46)
  • `(min.x <= max.x && min.y <= max.y && min.z <= max.z) && "The minimum corner of the box must be less than or equal to maximum corner"' failed. Aborted

  • I also got the same errors when using my ubuntu VM I am new to ROS and some ROS forums suggests to upgrade from Foxy to Galactic. But I was unable to find any resources on upgrading the Turtlebot3 to galactic as the official webpages only list instructions for foxy.

Or is there a simpler solution in foxy itself? If anyone knows please let me know.

I greatly appreciate any help in this regard,

Thanks in advance

edit retag flag offensive close merge delete

1 Answer

Sort by ยป oldest newest most voted
0

answered 2022-06-13 07:42:42 -0500

Joe28965 gravatar image

I'm guessing this is a hardware issue, based on the first error. They can be a pain to resolve.

1st question, does your computer have a dedicated video card? if so, could you check that you're using (I'm assuming it's nvidia) the proprietary nvidia drivers?

If your computer doesn't have a dedicated video card, then it might be that you're asking too much from your computer. In that case, I suggest starting Nav2 without rviz. I'm not seeing a setting for it, so you might need to manually build the tb3 repo and simply remove rviz from the launch file.

edit flag offensive delete link more

Question Tools

Stats

Asked: 2022-06-11 01:27:18 -0500

Seen: 261 times

Last updated: Jun 13 '22