mapping and navigation packages for humble
what packages can i use to implement mapping in humble? running ubuntu 22.04
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
octomap
and cartographer
are available for Humble Hawksbill. To find more mapping packages or any particular package available for the specific distro. The ROS Index lists all the packages available for all the distros.
~Gundam Out`
Slam toolbox and Nav2 should be available for Humble.
There is a tutorial for SLAMming with Nav2.
ETA: Since Gazebo is no longer supported in Humble and the switch is being made to Ignition Gazebo, a lot of packages (including Nav2 and probably Slam Toolbox).
If you want to run it on a physical robot, I suggest building them both from source.
Asked: 2022-05-28 09:36:58 -0500
Seen: 477 times
Last updated: May 30 '22
Rviz2 wont show data although messages are arriving
Nav2 robot setup, local costmap not showing on Rviz
Image publishing over WiFi screeching to < 1FPS when workstation echoes topic
ros2 control read state from the velocity controller
[ROS2][Humble] async_send_request service result seldomly never returns using executors. [closed]
Writing to GPIO pins on Raspberry Pi from ROS2 node