EKF or KF package that fuse IMU and Pressure Sensros data for Velocity estimation?

asked 2021-09-22 04:31:13 -0500

Astronaut
302 ●177 ●206 ●214

Hi Im looking for a ROS package (KF or UKF or EKF) that can fuse IMU and Pressure Sensors data. I would like to have 6x6 estimated Velocity matrices( linear and angular) from the IMU and Pressure sensor data. IMU is 9 DOF ( orientation, angular_velocity and linear_acceleration) and the Pressure. Barometer(pressure sensor data) can be use for the underwater robot as assume the sea (water ) level is same(constant) and the pressure suppose to maintain same value my linear movement of the underwater robot (vehicle). Is it possible to use this package to fuse this IMU and Pressure data to obtain estimated Velocity (linear and angular)?

If no existing ROS package (that serve as velocity observer) and fuse IMU and Pressure data, then any other code or help that I can use and implemented in ROS?

Thanks

answered 2021-09-23 18:21:50 -0500

osilva

1650 ●3 ●172 ●19 https://github.com/rob...

Take a look at this ROS package : http://wiki.ros.org/hector_localization

The hector_localization stack is a collection of packages, that provide the full 6DOF pose of a robot or platform. It uses various sensor sources, which are fused using an Extended Kalman filter. Acceleration and angular rates from an inertial measurement unit (IMU) serve as primary measurements. The usage of other sensors is application-dependent. The hector_localization stack currently supports GPS, magnetometer, barometric pressure sensors and other external sources that provide a geometry_msgs/PoseWithCovariance message via the poseupdate topic.