Ask Your Question
0

Running openni_camera and an additional external USB camera

asked 2012-06-14 14:03:20 -0500

updated 2016-10-24 08:59:40 -0500

ngrennan gravatar image

I've been having issues when running simultaneously both the Kinect's camera and a secondary (external) USB camera. I have successfully run several cameras together (different drivers and flavors). I am also able to run a kinect without RGB depth registration (so the RGB camera is off) plus other external cameras. However, I can't seem to be able to run both the Kinect RGB camera and an additional USB camera.

Has anyone been successful with this setup: Kinect with RGB registration + Secondary USB camera?

edit retag flag offensive close merge delete

1 Answer

Sort by ยป oldest newest most voted
1

answered 2012-06-15 03:51:48 -0500

dinamex gravatar image

updated 2012-06-15 04:07:56 -0500

I would gess that this is caused by the high data amount of both devices. The Data is to much for one single USB-Bus (not ports). Try to check which bus the devices are connectet to by $lsusb . Then simply try to connect the devices to different buses. Another idea would be that the webcam is claiming the hole bandwith of to USB-port. Webcams request a whole load of bandwidth, usually more than they need. The uvcvideo kernel module can be set to ignore the requested bandwidth, and to calculate the right bandwidth. Try:

$sudo rmmod uvcvideo
$sudo modprobe uvcvideo quirks=128

This will be reset every reboot. If this works, create the following file:

$sudo vi /etc/modprobe.d/uvcvideo.conf

containing the line:

options uvcvideo quirks=128

reference:
http://comments.gmane.org/gmane.linux.drivers.uvc.devel/5510

https://www.linuxquestions.org/questions/linux-kernel-70/facecam-312-kernel-10-10-conflagration-help-853934/

edit flag offensive delete link more

Comments

Thanks, the "lsusb" command helped me realize my computer(s) had only 1 USB bus shared among the hubs (even when appearing to be physical apart). The quirks setting did help me with low resolution video and multiple UVC cameras, but still don't know which "mod probe" module applies to the kinect.

ubuntuslave gravatar imageubuntuslave ( 2012-06-15 18:30:35 -0500 )edit

Your Answer

Please start posting anonymously - your entry will be published after you log in or create a new account.

Add Answer

Question Tools

1 follower

Stats

Asked: 2012-06-14 14:03:20 -0500

Seen: 709 times

Last updated: Jun 15 '12