ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange
Ask Your Question
0

Finding the name of a camera

asked 2019-05-29 16:57:56 -0500

mbfg gravatar image

updated 2019-05-29 18:08:17 -0500

Geoff gravatar image

I'm trying to run the following ros command:

rosrun ros_flydra camhistograms --camera /Basler_XXX/image_raw

Where in the documentation for flydra, Basler_XXX is supposed to be replaced with the name of the camera you are using. I'm having trouble finding the name of my camera, and am confused if it is named by ros or by the flydra program.

When I run 'lsusb' I get the following

Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 002 Device 007: ID 1e10:3300 Point Grey Research, Inc. 

Bus 002 Device 002: ID 1e10:3300 Point Grey Research, Inc. 

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub

Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver

Bus 001 Device 003: ID 046d:c537 Logitech, Inc. 

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Where the two point grey cameras are the cameras I'm using.

In an example command a few lines down in the documentation:

rosrun camera_calibration cameracalibrator.py --size 6x8 --square=0.029 image:=/Basler_21020232/image_raw camera:=Basler_21020232

Which makes me think that the name I need is simply "Manufacturer_Serial" because the serial number is the same digits as his example when I run the command:

rosrun pointgrey_camera_driver list_cameras

Number of cameras found: 2

[0]Serial: 18467619, Model: Flea3 FL3-U3-13E4M, Vendor: Point Grey Research, Sensor: E2v EV76C560 (1/1.8" Mono CMOS), Resolution: 1280x1024, Color: false, Firmware Version: 2.15.3.3

[1]Serial: 18467624, Model: Flea3 FL3-U3-13E4M, Vendor: Point Grey Research, Sensor: E2v EV76C560 (1/1.8" Mono CMOS), Resolution: 1280x1024, Color: false, Firmware Version: 2.15.3.3

How can I find out the name needed for the command? Any suggestions are appreciated.

edit retag flag offensive close merge delete

1 Answer

Sort by ยป oldest newest most voted
1

answered 2019-05-29 18:32:07 -0500

Geoff gravatar image

updated 2019-05-29 18:32:31 -0500

What it is looking for is the name space of the image_raw topic to get images from. This is determined by whatever is launching your camera nodes.

If you already have camera nodes running:

The easiest way to get this is to start your camera nodes and run rostopic list. This will list the topics on your system, so just look for image_raw topics coming from your cameras. That will let you know what the fully-qualified topic name is, which is what you pass to the camhistograms node. If you want to check which topic is which camera, use the image_view package to display the image from the cameras, one at a time, and wave your hand in front of each camera to identify it.

If you do not already have camera nodes running:

You will need to start the nodes for your cameras. According to the pointgrey_camera_driver documentation, you should pass the serial number of the camera (which you have already found) in as the camera_serial argument for roslaunch. (I took a quick look at the code and it looks like it will try to find the serial number itself if you do not provide it.) However this is just for providing camera information. The node name and thus the name space the image_raw topic lives under has a default defined in the camera.launch file, but you can override that by passing the camera_name argument to roslaunch. Since you have two cameras, you will probably need to do this. The wonderful thing here is that you can define what each camera is called, so you know exactly what to pass to ros_flydra/camhistograms. If you name your cameras bob and bill, then the topics will be /bob/image_raw and /bill/image_raw.

edit flag offensive delete link more

Comments

Thanks for formatting my post so it is pretty, and thanks for the answer.

mbfg gravatar image mbfg  ( 2019-05-30 16:51:34 -0500 )edit

Question Tools

2 followers

Stats

Asked: 2019-05-29 16:57:56 -0500

Seen: 663 times

Last updated: May 29 '19