ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange
Ask Your Question
0

RGBD SLAM using Turtlebot 3's Realsense R200 camera

asked 2018-07-10 08:00:17 -0500

csg gravatar image

updated 2018-07-10 08:02:35 -0500

Hello all, I am trying to do a RGBD SLAM using Turtlebot 3 (waffle) and the Realsense R200 camera.

I have configured the R200 camera and tested it by running the following command [in TurtleBot]

$ roslaunch realsense_camera r200_nodelet_default.launch

While the realsense_camera node is running, I launched rqt_image_view by running the following command [in Remote PC]

$ rqt_image_view

The GUI application has appeared and video stream was successful. Then I used the depth data coming from the R200 camera and displayed it as a Point Cloud in Rviz, during SLAM (using gmapping). To do this I ran the following commands: [In Turtlebot] Ran the realsense_camera node.

$ roslaunch realsense_camera r200_nodelet_rgbd.launch

[In TurtleBot] Ran the turtlebot3_bringup node to get data for doing SLAM

$ roslaunch turtlebot3_bringup turtlebot3_robot.launch

[In Remote PC] Ran turtlebot3_slam node to do SLAM

$ roslaunch turtlebot3_slam turtlebot3_slam.launch

and then by using the teleop package I drove the robot and created a map. But the map that is created is actually a 2D map using the Laser Range Finder (as gmapping uses Lidar by default) and the depth info that is obtained from the R200 camera is only for demonstration purposes, i.e. it is not actually used to create the map. Then I decided to try the RTAB-MAP package to do the RGB-D SLAM. So I followed the steps given in RGB-D Handheld Mapping. I started by installing rtabmap_ros

$ sudo apt-get install ros-kinetic-rtabmap-ros

and then I ran

$ roscore
$ roslaunch turtlebot3_bringup turtlebot3_robot.launch
$ roslaunch realsense_camera r200_nodelet_rgbd.launch

// To get registration without empty lines
$ rosrun rtabmap_ros pointcloud_to_depthimage cloud:=/camera/depth/points camera_info:=/camera/rgb/camera_info image_raw:=/camera/depth/points/image_raw image:=/camera/depth/points/image _approx:=false _fill_holes_size:=2

// Launch (rtabmapviz): 
$ roslaunch rtabmap_ros rtabmap.launch rtabmap_args:="--delete_db_on_start"

// For R200
$ roslaunch rtabmap_ros rtabmap.launch rtabmap_args:="--delete_db_on_start" depth_topic:=/camera/depth_registered/sw_registered/image_rect_raw

// Using depth registered from `rtabmap_ros/pointcloud_to_depthimage`
$ roslaunch rtabmap_ros rtabmap.launch rtabmap_args:="--delete_db_on_start" depth_topic:=/camera/depth/points/image_raw /camera/color/camera_info

The RTAB-MAP interfaces launches successfully but nothing appears in the GUI and the following Warning is given:

[ WARN] [1500890325.598924032]: /rtabmap/rtabmapviz: Did not receive data since 5 seconds! Make sure the input topics are published ("$ rostopic hz my_topic") and the timestamps in their header are set. If topics are coming from different computers, make sure the clocks of the computers are synchronized ("ntpdate"). Parameter "approx_sync" is false, which means that input topics should have all the exact timestamp for the callback to be called. /rtabmap/rtabmapviz subscribed to (exact sync): /rtabmap/odom, /stereo_camera/left/image_rect_color, /stereo_camera/right/image_rect, /stereo_camera/left/camera_info, /stereo_camera/right/camera_info, /rtabmap/odom_info

At this point I am a little bit confused and hence I am seeking guidance. Please, help me.

I am using ROS Kinect. Ubuntu 16.04. 64-bit machine.

edit retag flag offensive close merge delete

1 Answer

Sort by ยป oldest newest most voted
0

answered 2018-08-23 17:45:54 -0500

er35 gravatar image

Your warning states the following: " Did not receive data since 5 seconds! .. /rtabmap/rtabmapviz subscribed to (exact sync): /rtabmap/odom, /stereo_camera/left/image_rect_color, /stereo_camera/right/image_rect, /stereo_camera/left/camera_info, /stereo_camera/right/camera_info, /rtabmap/odom_info"

Can you verify that you are publishing to these topics?

edit flag offensive delete link more

Question Tools

1 follower

Stats

Asked: 2018-07-10 08:00:17 -0500

Seen: 1,310 times

Last updated: Jul 10 '18