| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Hello I am making robot with raspberyy pi 3 that create map ı mean slam project. I install ros kinetic on raspberry pi 3 but ı dont know what is the next. I saw how to create simulation part and ı make it but ı dont know where ı start now
First of all, what exactly are you building? Which sensors do you have?
Generally speaking, your robot will need to publish the tf transformations of the base and odometry. Also, the transformation between the base and the image sensor you have (it can be a laser rangefinder, Kinect, or others). If you have a Kinect, you will need to transform the pointcloud in a laserscan (please refer to this package http://wiki.ros.org/pointcloud_to_las... )
Then, try some SLAM algorithms. I suggest GMapping to get started since it's well maintained and cover most of the situations http://wiki.ros.org/gmapping
I am building two wheel robot and ı will buy a rp lidar sensor and yes motor with encoder.First I thought do motor control and read encoder variable on ros and then the other step.And I think ı use raspberry pi 3 and arduino.Arduino make the motor control What is your opinon?Any advice will be great
Hi, I intend to do something similar. My main SLAM sensor will be a Scanse Sweep Lidar. The Raspberry Pi 3 and Sweep sensor will ride on a tracked DAGU Rover 5 chassis controlled by a Beagleboard Blue board running the ArduRover autopilot. The rover will have a GPS and compass for outdoor missions.
Do you have the right sensor? Lidar, rp-laser? Motor Encoders?
Asked: 2017-03-15 11:38:54 -0500
Seen: 1,478 times
Last updated: Mar 15 '17
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
