3D costmap as obstacle for MoveIt!
Dear Ros Users,
I am using MoveIt for controlling a robotic arm
Is there a way to use a 3D grid as costmap as obstacle for MoveIT planner? Thanks!
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Dear Ros Users,
I am using MoveIt for controlling a robotic arm
Is there a way to use a 3D grid as costmap as obstacle for MoveIT planner? Thanks!
While not entirely identical to the way the 2DCostmap works, the Octomap is probably the closest alternative for 3D. Usually, the Octomap is fed by a depth camera, but it is also possible to specify the occupied voxels in any other way. The occupied voxels are then treated as collision obstacles, so MoveIt! planners will avoid any collisions with these voxels.
Have a look at this tutorial to see how it is used with a depth camera. This will also function for any other node publishing sensor_msgs/PointCloud2
messages on the input topic.
Asked: 2016-12-02 03:33:31 -0500
Seen: 1,781 times
Last updated: Dec 02 '16
dual arm closed kinematic chain planning in Moveit
error building moveit workspace: cannot find __main__ module
How can I use object pose estimation to pick up an object in Moveit?
Optimization Objective has no effect
Distance to collision normal in MoveIt!
UR5 does not move with object in grasp
Cartesian angular veloctiies (Rate of change of Quaternion to Rate of change of Euler angle)
MATLAB integration with ROS for Cartesian Motion Planning using Moveit
How run multiple move_group for different robots in single system