ROS hydro xsens_driver for MTi
Does the xsens_driver ( http://wiki.ros.org/xsens_driver ) support hydro? As there is no files under the hydro version.
Thanks in advance!
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Does the xsens_driver ( http://wiki.ros.org/xsens_driver ) support hydro? As there is no files under the hydro version.
Thanks in advance!
The master branch cannot work directly for ROS hydro version.
But we could install the ros-hydro-gps-common from the Synaptic Package Manager.
And then $git clone https://github.com/ethz-asl/ethzasl_x... $catkin_make
After that, it should work
To use the xsens_driver, the USB access shall be changed to the administrator
$sudo chmod 777 /dev/ttyUSB0
Then the xsens_driver could be launched and the imu data could be viewed by the following command.
$roslaunch xsens_driver xsens_driver.launch $rostopic echo /imu/data
Have you tried installing it from debs?
sudo apt-get install ros-hydro-xsens-driver
Works for me, and appears to install the appropriate driver nodes. I don't have an xsens, so I can't test if the driver actually works or not.
Asked: 2014-11-23 22:37:17 -0500
Seen: 338 times
Last updated: Nov 24 '14
Kuka YouBot Error pid 3556, exit code 127
Is there a way to specify the initial position of the Robotic from .world file?
Why collision is not working for UR5
Ros ultrasonic sensor Rviz Error
Why ar_track_alvar is not installing?
Getting time out error when installing ros2
Best way to send a goal with move_base that is off the global costmap?