ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange
Ask Your Question
0

Use PTZ controls on Axis Camera [closed]

asked 2014-10-27 16:21:01 -0500

ajain gravatar image

I have an Axis camera (AXIS M5014 PTZ) and I am using axis_camera package to get the video stream. The video stream using axis.py works perfectly fine.

Now I am trying to use axis_ptz.py node to control PTZ parameters of the camera. Firstly, there is barely any documentation on this page explaining how you can actually set the parameters for dynamic configuration. After some research I found that rosrun rqt_reconfigure rqt_reconfigure opens a GUI for you to set parameters on different available variables. Now, only "pan" variable works, and "tilt" doesn't do anything. Are there and examples/tutorials/documentation that can help me out?

edit retag flag offensive reopen merge delete

Closed for the following reason the question is answered, right answer was accepted by ajain
close date 2015-01-05 12:41:28.788366

1 Answer

Sort by ยป oldest newest most voted
2

answered 2014-10-29 13:11:31 -0500

Murilo F. M. gravatar image

The teleop.py node subscribes to sensor_msgs/Joy and publishes axis_camera/Axis messages. If you have a joystick, you should be able to control the PTZ using it.

The axis_ptz.py node subscribes to the cmd topic and receives the published axis_camera/Axis in order to control the PTZ unit.

In a nutshell, if you publish axis_camera/Axis messages from your node, you should be able to control the PTZ unit. I based myself on the teleop.py when I wrote my own node.

As for the dynamic reconfigure, I haven't tried that out.

I hope it helps!

edit flag offensive delete link more

Question Tools

1 follower

Stats

Asked: 2014-10-27 16:21:01 -0500

Seen: 1,044 times

Last updated: Oct 29 '14