escape behavior change
hi, all,
on my robot, the escape behaviour in move_base navigation stack is too 'fierce'. the rotation is much too fast.
how can I change it?
rgds
Ray
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
hi, all,
on my robot, the escape behaviour in move_base navigation stack is too 'fierce'. the rotation is much too fast.
how can I change it?
rgds
Ray
The parameters for configuring the recovery behaviors are listed here: http://wiki.ros.org/rotate_recovery#T...
You can remove the recovery behaviors by configuring the recovery_behaviors parameter. http://wiki.ros.org/move_base#Parameters
Asked: 2014-07-30 05:51:12 -0500
Seen: 944 times
Last updated: Jul 30 '14
Mini-Turty robot get stuck on corner when navigating
Is the robot always centered in a local costmap?
local costmap point of lethal obstacle in the center of robot frame
Symbol lookup error using move_base
Check that a pose is free in a costmap
Sometimes global_plannner generates a path inside the inscribed cost area
Catch goal status in custom global planner
Or, is there a way to inhibit the rotatory recovery behaviour?