failed to connect xbee.
when i run the following command i got "Failed to connect to the XBee"
command..."rosrun rosserial_xbee setup_xbee.py /dev/ttyUSB0 0"
i am using ros-hydro.
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
when i run the following command i got "Failed to connect to the XBee"
command..."rosrun rosserial_xbee setup_xbee.py /dev/ttyUSB0 0"
i am using ros-hydro.
Can you connect to the xbee using X-CTU? Also, since the coordinator needs an ID of 0, you should use rosrun rosserial_xbee setup_xbee.py -C /dev/ttyUSB0 0
ya i can connect it using X-CTU........and also i have used ''rosrun rosserial_xbee setup_xbee.py -C /dev/ttyUSB0 0"......but same error....please any other way to solve it.....
ye sir....i am using series 1 xbees.......also i have checked with xbee pro....but same result....
i am also getting the same error though connected xbee on ttyUSB0 and also i can connect it to XCTU
It gets solved by setting the baud rate of 57600 in X-CTU.
Asked: 2014-03-31 23:52:05 -0500
Seen: 875 times
Last updated: May 25 '16
Ros ultrasonic sensor Rviz Error
Turning lights On and Off on Gazebo with ROS
roscd: No such package/stack 'turtlebot_navigation/'
Implementation of two subscribers
Nodelet performance vs number of instances
Unable to download model manifests
use custom ompl instead of ros own ompl
How to add image texture to gazebo as material through blender settings
Simultaneous WiFi Internet + Ethernet Velodyne LIDAR Connections
A little more context information will go a long way in helping you.