Revision history [back]

Good afternoon partners.

After several attemps to regenerate ros_build I´m still having the same error messages I´m running ROS Groovy in a Raspberry Pi with raspbian.

Exporting to /home/pi/catkin_ws/src/rosserial/rosserial_arduino/src Traceback (most recent call last): File "/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/rosserial_arduino/make_libraries.py", line 87, in <module> shutil.copytree(rosserial_arduino_dir+"/src/ros_lib", path+"/ros_lib") File "/usr/lib/python2.7/shutil.py", line 171, in copytree names = os.listdir(src) OSError: [Errno 2] No such file or directory: '/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/ros_lib'

I have followed the instructions as "galdeano" said above but I´m thinking that I´m doing someething wrong. I´m going to programm the Arduino on Windows

My question is , which folder ros_lib have I to delete before regenerate it?

I have one of them in /opt/ros/groovy/share/rosserial_arduino/src and the other one into /catkin_ws/src/rosserial/rosserial_arduino/src/

I have created a new folder into my home called WindowsRos_Build where I want to regenerate my new ros_lib folder but as the tutorial says I have to delete first of all the existing ros_build folder.

Probably I´m doing something wrong... Could you help me please?

Thanks a lot

Good afternoon partners.

After several attemps to regenerate ros_build I´m still having the same error messages I´m running ROS Groovy in a Raspberry Pi with raspbian.

Exporting to /home/pi/catkin_ws/src/rosserial/rosserial_arduino/src Traceback (most recent call last): last):

File "/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/rosserial_arduino/make_libraries.py", line 87, in <module> shutil.copytree(rosserial_arduino_dir+"/src/ros_lib", path+"/ros_lib") path+"/ros_lib")

File "/usr/lib/python2.7/shutil.py", line 171, in copytree names = os.listdir(src) os.listdir(src)

OSError: [Errno 2] No such file or directory: '/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/ros_lib'

I have followed the instructions as "galdeano" said above but I´m thinking that I´m doing someething wrong. I´m going to programm the Arduino on Windows

My question is , which folder ros_lib have I to delete before regenerate it?

I have one of them in /opt/ros/groovy/share/rosserial_arduino/src and the other one into /catkin_ws/src/rosserial/rosserial_arduino/src/

I have created a new folder into my home called WindowsRos_Build where I want to regenerate my new ros_lib folder but as the tutorial says I have to delete first of all the existing ros_build folder.

Probably I´m doing something wrong... Could you help me please?

Thanks a lot

Good afternoon partners.

After several attemps to regenerate ros_build I´m still having the same error messages I´m running ROS Groovy in a Raspberry Pi with raspbian.

Exporting to /home/pi/catkin_ws/src/rosserial/rosserial_arduino/src Traceback (most recent call last):

File "/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/rosserial_arduino/make_libraries.py", line 87, in <module> shutil.copytree(rosserial_arduino_dir+"/src/ros_lib", path+"/ros_lib")

File "/usr/lib/python2.7/shutil.py", line 171, in copytree names = os.listdir(src)

OSError: [Errno 2] No such file or directory: '/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/ros_lib'

I have followed the instructions as "galdeano" said above but I´m thinking that I´m doing someething wrong. I´m going to programm the Arduino on Windows

My question is , which folder ros_lib have I to delete before regenerate it?

I have one of them in /opt/ros/groovy/share/rosserial_arduino/src and the other one into /catkin_ws/src/rosserial/rosserial_arduino/src/ and the other one into /catkin_ws/install/share/rosserial_arduino/src/

I have created a new folder into my home called WindowsRos_Build where I want to regenerate my new ros_lib folder but as the tutorial says I have to delete first of all the existing ros_build folder.

Probably I´m doing something wrong... Could you help me please?

Thanks a lot

Good afternoon partners.

After several attemps to regenerate ros_build I´m still having the same error messages I´m running ROS Groovy in a Raspberry Pi with raspbian.

Exporting to /home/pi/catkin_ws/src/rosserial/rosserial_arduino/src Traceback (most recent call last):

File "/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/rosserial_arduino/make_libraries.py", line 87, in <module> shutil.copytree(rosserial_arduino_dir+"/src/ros_lib", path+"/ros_lib")

File "/usr/lib/python2.7/shutil.py", line 171, in copytree names = os.listdir(src)

OSError: [Errno 2] No such file or directory: '/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/ros_lib'

I have followed the instructions as "galdeano" said above but I´m thinking that I´m doing someething wrong. I´m going to programm the Arduino on Windows

My question is , which folder ros_lib have I to delete before regenerate it?

I have one of them in /opt/ros/groovy/share/rosserial_arduino/src and the other one into /catkin_ws/src/rosserial/rosserial_arduino/src/ and the other one into /catkin_ws/install/share/rosserial_arduino/src/

I have created a new folder into my home called WindowsRos_Build where I want to regenerate my new ros_lib folder but as the tutorial says I have to delete first of all the existing ros_build folder.

Probably I´m doing something wrong... Could you help me please?

Thanks a lot

Good afternoon partners.

After several attemps to regenerate ros_build I´m still having the same error messages I´m running ROS Groovy in a Raspberry Pi with raspbian.

Exporting to /home/pi/catkin_ws/src/rosserial/rosserial_arduino/src Traceback (most recent call last):

File "/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/rosserial_arduino/make_libraries.py", line 87, in <module> shutil.copytree(rosserial_arduino_dir+"/src/ros_lib", path+"/ros_lib")

File "/usr/lib/python2.7/shutil.py", line 171, in copytree names = os.listdir(src)

OSError: [Errno 2] No such file or directory: '/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/ros_lib'

I have followed the instructions as "galdeano" said above but I´m thinking that I´m doing someething wrong. I´m going to programm the Arduino on Windows

My question is , which folder ros_lib have I to delete before regenerate it?

I have one of them in /opt/ros/groovy/share/rosserial_arduino/src and the other one into /catkin_ws/src/rosserial/rosserial_arduino/src/ and the other one into /catkin_ws/install/share/rosserial_arduino/src/

I have created a new folder into my home called WindowsRos_Build where I want to regenerate my new ros_lib folder but as the tutorial says I have to delete first of all the existing ros_build folder.

Probably I´m doing something wrong... Could you help me please?

When I do : rosrun rosserial_arduino make_libraries.py . y into my windows destinated folder I get the next report where I receive some erros which I don´t know if they can cause me problems:

Exporting to . .

Exporting rosserial_msgs

Messages: Log,TopicInfo,

Services: RequestParam,RequestMessageInfo,

Exporting std_msgs

Messages: UInt32MultiArray,Int64,UInt8MultiArray,Float32,Int32MultiArray,UInt64,Int16, UInt16,Float64,Float32MultiArray,MultiArrayDimension,Duration,Float64MultiArray, Int32,UInt8,Int8,Int16MultiArray,Time,Byte,Bool,ByteMultiArray,UInt32,MultiArray Layout,UInt16MultiArray,ColorRGBA,UInt64MultiArray,Int8MultiArray,Char,Int64Mult iArray,Header,String,Empty,Exporting geometry_msgs

Messages: Vector3,TwistWithCovarianceStamped,Quaternion,Pose,PolygonStamped,TransformS tamped,Twist,WrenchStamped,QuaternionStamped,PointStamped,Vector3Stamped,Point,P oseWithCovarianceStamped,Wrench,PoseArray,PoseWithCovariance,Pose2D,Point32,Tran sform,TwistWithCovariance,TwistStamped,PoseStamped,Polygon,Exporting std_srvs

Services: Empty,

Exporting sensor_msgs

Messages: ChannelFloat32,NavSatStatus,Joy,LaserScan,MagneticField,RegionOfInterest,Nav SatFix,RelativeHumidity,TimeReference,CameraInfo,MultiEchoLaserScan,JointState,P ointCloud,Range,LaserEcho,JoyFeedbackArray,JoyFeedback,PointField,Temperature,Il luminance,FluidPressure,CompressedImage,Image,Imu,PointCloud2,

Services: SetCameraInfo,

Exporting actionlib_msgs

Messages: GoalStatus,GoalID,GoalStatusArray,Exporting bond

Messages: Status,Constants,Exporting rosgraph_msgs

Messages: Log,Clock,Exporting diagnostic_msgs

Messages: DiagnosticStatus,KeyValue,DiagnosticArray,

Services: SelfTest,

Exporting roscpp

Messages: Logger,

Services: SetLoggerLevel,GetLoggers,Empty,

Exporting turtlesim

Messages: Pose,Velocity,Color,

Services: TeleportAbsolute,TeleportRelative,Spawn,Kill,SetPen,

Exporting roscpp_tutorials

Services: TwoInts,

Exporting rospy_tutorials

Messages: HeaderString,Floats,

Services: AddTwoInts,BadTwoInts,

Exporting actionlib

Messages: TestAction,TwoIntsAction,TestActionFeedback,TestActionGoal,TestFeedback,Test RequestFeedback,TestRequestActionFeedback,TestRequestActionResult,TwoIntsFeedbac k,TwoIntsActionGoal,TestRequestResult,TwoIntsGoal,TestRequestGoal,TestActionResu lt,TwoIntsResult,TestGoal,TwoIntsActionResult,TestRequestAction,TestRequestActio nGoal,TwoIntsActionFeedback,TestResult,Exporting topic_tools

Services: MuxAdd,MuxDelete,MuxList,MuxSelect,

Exporting dynamic_reconfigure

Messages: Config,DoubleParameter,ConfigDescription,Group,StrParameter,IntParameter,Par amDescription,BoolParameter,GroupState,SensorLevels,

Services: Reconfigure,

Exporting nodelet

Services: NodeletList,NodeletLoad,NodeletUnload,

Exporting beginner_tutorials

Messages: Num,

Good afternoon partners.

After several attemps to regenerate ros_build I´m still having the same error messages I´m running ROS Groovy in a Raspberry Pi with raspbian.

Exporting to /home/pi/catkin_ws/src/rosserial/rosserial_arduino/src Traceback (most recent call last):

File "/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/rosserial_arduino/make_libraries.py", line 87, in <module> shutil.copytree(rosserial_arduino_dir+"/src/ros_lib", path+"/ros_lib")

File "/usr/lib/python2.7/shutil.py", line 171, in copytree names = os.listdir(src)

OSError: [Errno 2] No such file or directory: '/home/pi/catkin_ws/src/rosserial/rosserial_arduino/src/ros_lib'

I have followed the instructions as "galdeano" said above but I´m thinking that I´m doing someething wrong. I´m going to programm the Arduino on Windows

My question is , which folder ros_lib have I to delete before regenerate it?

I have one of them in /opt/ros/groovy/share/rosserial_arduino/src and the other one into /catkin_ws/src/rosserial/rosserial_arduino/src/ and the other one into /catkin_ws/install/share/rosserial_arduino/src/

I have created a new folder into my home called WindowsRos_Build where I want to regenerate my new ros_lib folder but as the tutorial says I have to delete first of all the existing ros_build folder.

Probably I´m doing something wrong... Could you help me please?

When I do : rosrun rosserial_arduino make_libraries.py . into my windows destinated folder I get the next report where I receive some erros which I don´t know if they can cause me problems:messages with not founded packets and I´m worried about it:

Exporting to .

Exporting rosserial_msgs

Messages: Log,TopicInfo,

Services: RequestParam,RequestMessageInfo,

Exporting std_msgs

Messages: UInt32MultiArray,Int64,UInt8MultiArray,Float32,Int32MultiArray,UInt64,Int16, UInt16,Float64,Float32MultiArray,MultiArrayDimension,Duration,Float64MultiArray, Int32,UInt8,Int8,Int16MultiArray,Time,Byte,Bool,ByteMultiArray,UInt32,MultiArray Layout,UInt16MultiArray,ColorRGBA,UInt64MultiArray,Int8MultiArray,Char,Int64Mult iArray,Header,String,Empty,Exporting geometry_msgs

Messages: Vector3,TwistWithCovarianceStamped,Quaternion,Pose,PolygonStamped,TransformS tamped,Twist,WrenchStamped,QuaternionStamped,PointStamped,Vector3Stamped,Point,P oseWithCovarianceStamped,Wrench,PoseArray,PoseWithCovariance,Pose2D,Point32,Tran sform,TwistWithCovariance,TwistStamped,PoseStamped,Polygon,Exporting std_srvs

Services: Empty,

Exporting sensor_msgs

Messages: ChannelFloat32,NavSatStatus,Joy,LaserScan,MagneticField,RegionOfInterest,Nav SatFix,RelativeHumidity,TimeReference,CameraInfo,MultiEchoLaserScan,JointState,P ointCloud,Range,LaserEcho,JoyFeedbackArray,JoyFeedback,PointField,Temperature,Il luminance,FluidPressure,CompressedImage,Image,Imu,PointCloud2,

Services: SetCameraInfo,

Exporting actionlib_msgs

Messages: GoalStatus,GoalID,GoalStatusArray,Exporting bond

Messages: Status,Constants,Exporting rosgraph_msgs

Messages: Log,Clock,Exporting diagnostic_msgs

Messages: DiagnosticStatus,KeyValue,DiagnosticArray,

Services: SelfTest,

Exporting roscpp

Messages: Logger,

Services: SetLoggerLevel,GetLoggers,Empty,

Exporting turtlesim

Messages: Pose,Velocity,Color,

Services: TeleportAbsolute,TeleportRelative,Spawn,Kill,SetPen,

Exporting roscpp_tutorials

Services: TwoInts,

Exporting rospy_tutorials

Messages: HeaderString,Floats,

Services: AddTwoInts,BadTwoInts,

Exporting actionlib

Messages: TestAction,TwoIntsAction,TestActionFeedback,TestActionGoal,TestFeedback,Test RequestFeedback,TestRequestActionFeedback,TestRequestActionResult,TwoIntsFeedbac k,TwoIntsActionGoal,TestRequestResult,TwoIntsGoal,TestRequestGoal,TestActionResu lt,TwoIntsResult,TestGoal,TwoIntsActionResult,TestRequestAction,TestRequestActio nGoal,TwoIntsActionFeedback,TestResult,Exporting topic_tools

Services: MuxAdd,MuxDelete,MuxList,MuxSelect,

Exporting dynamic_reconfigure

Messages: Config,DoubleParameter,ConfigDescription,Group,StrParameter,IntParameter,Par amDescription,BoolParameter,GroupState,SensorLevels,

Services: Reconfigure,

Exporting nodelet

Services: NodeletList,NodeletLoad,NodeletUnload,

Exporting beginner_tutorials

Messages: Num,