PeterMilani's profile - overview

● Enthusiast   × 1

● Citizen Patrol   × 1

• صيانة كلفينيتور– مركز صيانة كلفينيتو 01112225250 توكيل KELVINATOR

● Good Answer   × 9

• Steps-How to Start with Navigation Stack
• setup.py not installing python module during catkin build
• implementing realtime controllers with ros_control
• Getting contact sensor/bumper Gazebo plugin to work
• no matching function for call to ‘ros::NodeHandle::advertiseService(const char [12], bool (Eddie::*)(), Eddie* const)’
• Setting joint velocity in Gazebo
• server parameters vs dynamic reconfigure?
• Choosing the right coefficients for Gazebo simulation
• How to Connect a tf::messageFilter to two subscribers

● Self-Learner   × 5

• setup.py not installing python module during catkin build
• Dynamic information flow between ROSJAVA nodes and ROSActivity
• implementing realtime controllers with ros_control
• Problems installing Hydro on 12.04 from source on armhf
• How to Connect a tf::messageFilter to two subscribers

● Notable Question   × 35

• ros2 bag reindex fails after bag not shutdown correctly
• Throttling AsyncSpinner Rate
• Getting Eigen3 Matrix3f::eulerAngles() values similar to tf2 Matrix3x3f::getRPY() roll, pitch, yaw
• setup.py not installing python module during catkin build
• snapcraft plugin cannot find header files of catkin packages
• Running Gazebo on a Server in ROS
• rosjava android - error communicating with phone node
• Android Heap Space Errors
• How to use IOIO with android_core
• Arm Navigation interfaces for custom manipulators
• Gazebo Crashes when modifying joint velocities
• ROSActivity shutting down upon launching MasterChooser
• Intergrating IOIO with android_core
• Dynamic information flow between ROSJAVA nodes and ROSActivity
• Understanding trajectory_msgs/JointTrajectory
• How do you specify joint location in SDF 1.0
• Parsing a urdf model in Rosjava
• using arm_navigation_msgs/GetMotionPlan: what setup/nodes are required to receive trajectories programatically
• build of ros fuerte colladadom fails on armhf - beaglebone
• ompl_planning/GetMotionPlan returns non-valid trajectories
• arm_navigation stack: ompl node not recognising end effector/tip name for processing Cartesian Goals
• Beagle bone and uvc_camera
• implementing realtime controllers with ros_control
• Problems installing Hydro on 12.04 from source on armhf
• Catkin and Eclipse - builds but indexing errors stop autocompletion
• Which source variant contains ros_control?
• Using Controller Manager and getting it to work.
• Collada-urdf linking failure
• Using octomap::OcTree as a type in a vector
• Skip dependencies with rosdep install?
• How to Connect a tf::messageFilter to two subscribers
• Problem with nmea_serial_driver
• Rviz plotting points to the nearest 0.5m in the y-direction
• ROS and Gazebo trouble with an ODElink exception.
• when will Python 3 become the ROS standard

● Popular Question   × 35

• ros2 bag reindex fails after bag not shutdown correctly
• Throttling AsyncSpinner Rate
• Getting Eigen3 Matrix3f::eulerAngles() values similar to tf2 Matrix3x3f::getRPY() roll, pitch, yaw
• setup.py not installing python module during catkin build
• snapcraft plugin cannot find header files of catkin packages
• Running Gazebo on a Server in ROS
• Android Heap Space Errors
• ROSActivity shutting down upon launching MasterChooser
• Intergrating IOIO with android_core
• rosjava android - error communicating with phone node
• How to use IOIO with android_core
• Gazebo Crashes when modifying joint velocities
• Arm Navigation interfaces for custom manipulators
• Dynamic information flow between ROSJAVA nodes and ROSActivity
• Understanding trajectory_msgs/JointTrajectory
• Parsing a urdf model in Rosjava
• How do you specify joint location in SDF 1.0
• ROS and Gazebo trouble with an ODElink exception.
• using arm_navigation_msgs/GetMotionPlan: what setup/nodes are required to receive trajectories programatically
• build of ros fuerte colladadom fails on armhf - beaglebone
• ompl_planning/GetMotionPlan returns non-valid trajectories
• arm_navigation stack: ompl node not recognising end effector/tip name for processing Cartesian Goals
• Beagle bone and uvc_camera
• implementing realtime controllers with ros_control
• Problems installing Hydro on 12.04 from source on armhf
• Which source variant contains ros_control?
• Catkin and Eclipse - builds but indexing errors stop autocompletion
• Using Controller Manager and getting it to work.
• Collada-urdf linking failure
• Using octomap::OcTree as a type in a vector
• Skip dependencies with rosdep install?
• How to Connect a tf::messageFilter to two subscribers
• Problem with nmea_serial_driver
• Rviz plotting points to the nearest 0.5m in the y-direction
• when will Python 3 become the ROS standard

● Famous Question   × 34

• ros2 bag reindex fails after bag not shutdown correctly
• Throttling AsyncSpinner Rate
• snapcraft plugin cannot find header files of catkin packages
• Getting Eigen3 Matrix3f::eulerAngles() values similar to tf2 Matrix3x3f::getRPY() roll, pitch, yaw
• setup.py not installing python module during catkin build
• when will Python 3 become the ROS standard
• Android Heap Space Errors
• Running Gazebo on a Server in ROS
• Arm Navigation interfaces for custom manipulators
• rosjava android - error communicating with phone node
• ROSActivity shutting down upon launching MasterChooser
• How to use IOIO with android_core
• Understanding trajectory_msgs/JointTrajectory
• Dynamic information flow between ROSJAVA nodes and ROSActivity
• using arm_navigation_msgs/GetMotionPlan: what setup/nodes are required to receive trajectories programatically
• build of ros fuerte colladadom fails on armhf - beaglebone
• ompl_planning/GetMotionPlan returns non-valid trajectories
• Gazebo Crashes when modifying joint velocities
• Parsing a urdf model in Rosjava
• Beagle bone and uvc_camera
• implementing realtime controllers with ros_control
• Problems installing Hydro on 12.04 from source on armhf
• Catkin and Eclipse - builds but indexing errors stop autocompletion
• arm_navigation stack: ompl node not recognising end effector/tip name for processing Cartesian Goals
• Using Controller Manager and getting it to work.
• Intergrating IOIO with android_core
• Using octomap::OcTree as a type in a vector
• Which source variant contains ros_control?
• How to Connect a tf::messageFilter to two subscribers
• How do you specify joint location in SDF 1.0
• Problem with nmea_serial_driver
• Skip dependencies with rosdep install?
• Collada-urdf linking failure
• Rviz plotting points to the nearest 0.5m in the y-direction

● Taxonomist   × 1

● Enlightened   × 1

• Setting joint velocity in Gazebo

● Rapid Responder   × 1

• ros2 bag reindex fails after bag not shutdown correctly

● Good Question   × 3

• Understanding trajectory_msgs/JointTrajectory
• Using Controller Manager and getting it to work.
• when will Python 3 become the ROS standard

● Guru   × 3

• Getting contact sensor/bumper Gazebo plugin to work
• setup.py not installing python module during catkin build
• server parameters vs dynamic reconfigure?

● Nice Question   × 9

• Skip dependencies with rosdep install?
• Understanding trajectory_msgs/JointTrajectory
• setup.py not installing python module during catkin build
• Using Controller Manager and getting it to work.
• when will Python 3 become the ROS standard
• Problems installing Hydro on 12.04 from source on armhf
• build of ros fuerte colladadom fails on armhf - beaglebone
• How to Connect a tf::messageFilter to two subscribers
• Arm Navigation interfaces for custom manipulators

● Great Answer   × 3

• Getting contact sensor/bumper Gazebo plugin to work
• setup.py not installing python module during catkin build
• server parameters vs dynamic reconfigure?

● Nice Answer   × 17

• Adding a camera to my urdf
• setup.py not installing python module during catkin build
• Getting contact sensor/bumper Gazebo plugin to work
• no matching function for call to ‘ros::NodeHandle::advertiseService(const char [12], bool (Eddie::*)(), Eddie* const)’
• Choosing the right coefficients for Gazebo simulation
• Creating a ROS bag file from csv file data
• Writing a Simple Publisher and Subscriber (Java)
• Setting joint velocity in Gazebo
• what's rosjava mechanism on android?
• server parameters vs dynamic reconfigure?
• implementing realtime controllers with ros_control
• motor encoder
• costmap begineer question[update]
• Problems installing Hydro on 12.04 from source on armhf
• How to Connect a tf::messageFilter to two subscribers
• ROSJava communication with outside program
• Steps-How to Start with Navigation Stack

● Favorite Question   × 1

• Understanding trajectory_msgs/JointTrajectory

● Supporter   × 1

• Network configuration ros <--> android_core

● Student   × 1

• Running Gazebo on a Server in ROS

● Teacher   × 1

• no matching function for call to ‘ros::NodeHandle::advertiseService(const char [12], bool (Eddie::*)(), Eddie* const)’

● Scholar   × 1

• Gazebo Crashes when modifying joint velocities

● Necromancer   × 5

• Choosing the right coefficients for Gazebo simulation
• Cannot locate message "MultiArrayLayout" in python ROS bag API
• Explain RosTextView
• Adding a camera to my urdf
• Getting contact sensor/bumper Gazebo plugin to work

● Editor   × 1

• Android Heap Space Errors

● Commentator   × 1

• Gazebo SDF model loading in Groovy

● Critic   × 1

• Gazebo URDF deprecated?

● Organizer   × 1

• Dynamic information flow between ROSJAVA nodes and ROSActivity