Hi, I use TEB as a local path planner for a car-like robot.

Below are the parameters:

    TebLocalPlannerROS:

 odom_topic: odom

 # Trajectory

 teb_autosize: True
 dt_ref: 0.35
 dt_hysteresis: 0.1
 global_plan_overwrite_orientation: True
 allow_init_with_backwards_motion: True
 max_global_plan_lookahead_dist: 5.0
 feasibility_check_no_poses: 2
 global_plan_viapoint_sep: 0.5

 # Robot

 max_vel_x: 0.55
 max_vel_x_backwards: 0.3
 max_vel_y: 0.0
 max_vel_theta: 0.5 # the angular velocity is also bounded by min_turning_radius in case of a carlike robot (r = v / omega)
 acc_lim_x: 0.5
 acc_lim_theta: 0.2


 # ********************** Carlike robot parameters ********************
 min_turning_radius: 1.0       # Min turning radius of the carlike robot (compute value using a model or adjust with rqt_reconfigure manually)
 wheelbase: 1.35                # Wheelbase of our robot
 cmd_angle_instead_rotvel: False # stage simulator takes the angle instead of the rotvel as input (twist message)
 # ********************************************************************

 footprint_model: # types: "point", "circular", "two_circles", "line", "polygon"
   type: "line"
   radius: 0.2 # for type "circular"
   line_start: [0.3, 0.0] # for type "line"
   line_end: [1.1, 0.0] # for type "line"
   front_offset: 1.0 # for type "two_circles"
   front_radius: 0.56 # for type "two_circles"
   rear_offset: -0.16 # for type "two_circles"
   rear_radius: 0.56 # for type "two_circles"
   vertices: [ [0.0, 0], [0.0, 1.55], [1.55, 0.4], [0.0, 0.4 ]] # for type "polygon"

 # GoalTolerance

 xy_goal_tolerance: 0.2
 yaw_goal_tolerance: 0.1
 free_goal_vel: False

 # Obstacles

 min_obstacle_dist: 0.85 # This value must also include our robot's expansion 0.6m for line type"
 include_costmap_obstacles: True
 costmap_obstacles_behind_robot_dist: 1.0
 obstacle_poses_affected: 25
 costmap_converter_plugin: ""
 costmap_converter_spin_thread: True
 costmap_converter_rate: 5


 # Optimization

 no_inner_iterations: 5
 no_outer_iterations: 4
 optimization_activate: True
 optimization_verbose: False
 penalty_epsilon: 0.1
 weight_max_vel_x: 1
 weight_max_vel_theta: 1
 weight_acc_lim_x: 1
 weight_acc_lim_theta: 5
 weight_kinematics_nh: 1000
 weight_kinematics_forward_drive: 1
 weight_kinematics_turning_radius: 1
 weight_optimaltime: 1
 weight_obstacle: 50
 weight_dynamic_obstacle: 10 # not in use yet

 # Homotopy Class Planner

 enable_homotopy_class_planning: True
 enable_multithreading: True
 simple_exploration: False
 max_number_classes: 2
 selection_cost_hysteresis: 1.0
 selection_obst_cost_scale: 1.0
 selection_alternative_time_cost: False
 roadmap_graph_no_samples: 10
 roadmap_graph_area_width: 3
 h_signature_prescaler: 0.5
 h_signature_threshold: 0.1
 obstacle_keypoint_offset: 0.1
 obstacle_heading_threshold: 0.45
 visualize_hc_graph: False

---

The local planned path has always an oscillation around global path, I have played with the parameter:

 dt_ref
 max_global_plan_lookahead_dist
 global_plan_viapoint_sep
 max_vel_theta
 acc_lim_theta
 weight_acc_lim_theta

But not help. The robot can move can avoid obstacles, but always in this oscillating way, and there is no warning or error output in console.

Can anyone give me some suggestion?

---